Tools & Accessories
-
Telescopic Window Cleaner with Spray, Window Squeegee with Sponge, Window Cleaning Tool with Long Handle
Telescopic Window Cleaner with Spray, Window Squeegee with Sponge, Window Cleaning Tool Spray and wipe in one motion: press the trigger to release cleaning solution right onto the glass as you clean Two tools in one head: a squeegee blade lifts water while the sponge side handles the scrubbing Extends your reach: the telescopic handle gets you to windows you cannot reach from the ground Check the solution at a glance: the transparent reservoir sits right in the handle, so you always know what's left One tool for the whole job: no separate spray bottle or rag to carry from window to window Streaky windows usually come down to juggling the wrong tools — a spray bottle in one hand and a rag in the other, dripping the whole time. This telescopic window cleaner puts everything into one handle: press the trigger to spray solution straight onto the glass, then flip to the squeegee side to pull it clean or the sponge side for stubborn spots. It comes as a 4.92 ft (1.5 m) set or a 6.23 ft (1.9 m) set, so you can pick the reach that suits your windows. Worried about running out of solution mid-clean? The see-through reservoir in the handle lets you check the level before you start.Think of it as a telescoping pole with the cleaning head built right onto the end, so there's no separate attachment to fumble with. As an extension pole window cleaner, it's just as handy for a second-story window or a car windshield you can't quite reach as it is for the glass door by your kitchen. Twist to extend it, spray, wipe, and you're done. Why choose Tuzwa Telescopic Spray Window Cleaner Feature Tuzwa Others Trigger sprays solution right onto the glass ✓ ✕ Squeegee blade and sponge pad in one head ✓ Blade only See-through reservoir shows the solution level ✓ ✕ Available in a 6.23 ft length option ✓ Shorter Comes as a two-length variant set for your reach ✓ One length 30-day easy returns ✓ Varies Key Features Press-Spray Grip: a trigger built into the handle sprays cleaning solution directly onto the glass as you clean Squeegee and Sponge Head: one side pulls water away with a squeegee blade, the other scrubs with a sponge pad See-Through Reservoir: the transparent solution reservoir sits in the handle, so you can see what's inside Two Reach Options: choose a 4.92 ft (1.5 m) set or a 6.23 ft (1.9 m) set depending on how far you need to reach One Handle, Two Jobs: spraying and wiping both happen from the same tool, with no separate bottle or cloth to carry around Specifications Handle Reach: 4.92 ft (1.5 m) Set or 6.23 ft (1.9 m) Set (choose at checkout) Cleaning Head: Squeegee blade on one side, sponge pad on the other Trigger: Press-to-spray handle Reservoir: Transparent, holds cleaning solution Package Includes: Included: 1 x telescopic spray window cleaner, in your selected length set Right for you if ✓You're tired of streaky windows — the trigger sprays solution right where you need it ✓You don't want to juggle a spray bottle and a rag — one head does both jobs ✓You're never sure how much solution is left — the see-through reservoir shows you at a glance ✓Your windows are hard to reach — the 6.23 ft set gives you the extra length If two or more of these sound like you, this is the one. FAQsQ: Which length should I choose?A: Two options are available — a 4.92 ft (1.5 m) set or a 6.23 ft (1.9 m) set — pick whichever suits your windows.Q: How does the spray feature work?A: A trigger built into the handle sprays cleaning solution straight onto the glass as you go.Q: What does the cleaning head look like?A: One side is a squeegee blade and the other is a sponge pad, so you can wet and wipe from a single head.Q: Can I see how much solution is left?A: Yes — the reservoir in the handle is transparent, so you can check the solution level at a glance.Q: Is this suitable for hard-to-reach windows?A: Yes — extending the handle to 4.92 ft (1.5 m) or 6.23 ft (1.9 m) gives you extra reach without stretching.
$87.90 - $97.94
-
Weed Puller Tool, Stand Up Weed Puller with Foot Pedal, Long Handle Weeding Tool with 3 Steel Claws
Weed Puller Tool, Stand Up Weed Puller with Foot Pedal, Long Handle Weeding Tool Stand tall while you weed: the long handle means no bending or kneeling to pull weeds Foot-powered push: step on the pedal to drive the claws into the ground with real force Grips the whole root: three steel claws seize weeds and their roots for a full pull, not just the top No chemicals needed: pull weeds out completely without spraying anything on your lawn Removal that lasts: gripping the root means the weed will not just grow right back Pulling weeds by hand means kneeling in the dirt and often leaving the root behind, while weed killer means spraying chemicals across your lawn. This standing weed puller solves both: step down on the foot pedal to drive three steel claws into the soil, then twist the handle to lift the whole weed, root included, without ever bending over. Worried it'll miss the root? The claws are built to grip weeds and their roots below the surface for a clean pull every time.Keep this weeder tool by the back door for whenever dandelions or crabgrass show up between mowings. As a weed removal tool it handles taprooted weeds as easily as shallow ones, and as a garden weeding tool it works on patios, garden beds, and lawn edges alike. Whether you think of it as a weed remover or simply your go-to stand up weeder, it turns a chore you'd normally dread into a quick, five-minute job. Why choose Tuzwa Standing Weed Puller Feature Tuzwa Others Foot pedal drives claws into the ground ✓ Hand force 3 steel claws grip the whole root system ✓ Top growth Stand-up design needs no bending or kneeling ✓ ✕ Removes weeds without any chemicals or spray ✓ Needs spray One-hand release button drops the weed ✓ Pull by hand 30-day easy returns ✓ Varies Key Features Easy, Non-Bending Handle: this handle allows non-bending operation, making it simple to remove weeds without stooping Foot Pedal Power: using the foot pedal lets you push the tool into the ground with the force needed to grip a weed 3 Steel Claws: with 3 steel claws, you can remain standing while weeding instead of stooping over and kneeling on the ground No Chemicals, No Strain: no chemicals are needed — the claws grip weeds and their roots for permanent removal, keeping things comfortable and convenient, with no more stinky weed killer residue on your clothes or skin Deep Root Removal: the foot pedal lets you exert enough force as a weed remover to pierce the soil and seize weeds along with their roots, stopping them from growing back Specifications Material: Aluminium, ABS, PP Color: Silver + Green Size: 19.7 x 8.9 x 2.0 in (50 x 22.6 x 5.1 cm) Package Includes: Included: 1 x standing weed pullerHow to UsePlace the pointed claw over the weed you want to remove and push the weeder firmly into the ground using the force of your foot.Twist the handle to one side to loosen and uproot the weed.Press the release button to drop the weed. Right for you if ✓You have back or knee pain — the foot pedal and long handle let you weed while standing upright ✓You're tired of weeds growing back — the 3 steel claws grip the whole root, not just the top growth ✓You'd rather skip chemicals — it pulls weeds out mechanically, with no spray needed ✓You weed on your own — one foot on the pedal and one hand on the handle gets the job done solo If two or more of these sound like you, this is the one. FAQsQ: Do I need to bend down to use this weed puller?A: No — the long handle and foot pedal let you stand upright the entire time you're weeding.Q: Does it remove the whole root, or just the top of the weed?A: The three steel claws grip below the surface, so the root comes out too.Q: Do I need any chemicals or weed killer with this?A: No — it removes weeds mechanically, so there's no spray, no chemicals, and no residue on your hands or clothes.Q: What is the puller made from?A: A mix of aluminium, ABS, and PP for a lightweight yet sturdy build in a silver and green finish.Q: Can one person operate it alone?A: Yes — one foot on the pedal and one hand on the handle is all it takes.
$94.21 $72.47
-
Long Handle Scrub Brush, Floor Scrub Brush with Stiff Bristles, Bathroom Cleaning Brush for Tile and Grout
Long Handle Scrub Brush, Floor Scrub Brush with Stiff Bristles, Bathroom Cleaning Brush Three jobs, one tool: brush and scraper combine to lift grime from walls, patios, kitchens, bathrooms, and more Reaches every corner: stiff bristles set at a right angle dig into grout lines and tight spots without scratching tile Twists to any angle: the rotating handle swivels so you can reach awkward spots without repositioning your whole stance Eases strain on your back: the angled head keeps a comfortable working position during longer scrubbing sessions Built for the long haul: sturdy plastic and wire construction with a joint that locks securely in place Grimy grout lines and stubborn floor stains are hard to shift with a flimsy brush, and bending over to scrub them by hand takes a toll on your back. This long handle scrub brush tackles both problems at once, pairing stiff bristles with a long, rotating handle so you can clean tile, tubs, and floors without kneeling or straining. The right-angle bristle head is built to dig into corners and seams that flatter brushes skip past. Worried about scratching delicate surfaces? Gentle, even pressure keeps it safe on everything from tile to hardwood.Use it as your everyday cleaning tool for kitchens and patios, or keep it by the shower as a dedicated shower scrub brush and tub scrubber for soap scum and grime. Think of it as a grout brush and grout cleaning brush combined, a hard bristle brush that also doubles as a bathtub scrub brush and floor brush for tile, hardwood, glass, and concrete. Why choose Tuzwa Long Handle Scrub Brush Feature Tuzwa Others Right-angle bristles dig into grout and corners ✓ ✕ Handle rotates for flexible cleaning access ✓ Fixed handle Ergonomic angle reduces strain on your back ✓ Bend and kneel Works on tile, hardwood, glass, and concrete ✓ Limited Durable PP and iron wire construction ✓ Plastic only 30-day easy returns ✓ Varies Key Features 3-in-1 Scrub Brush and Scraper: this floor scrub brush combines a scrubbing head and a built-in scraper in one design, cutting through grime on walls, patios, kitchens, and bathrooms in fewer passes Right-Angle Bristles: the stiff bristle head sits at a right angle so it reaches grout seams and tight corners that flat brushes skip Full Rotation Handle: the long handle swivels a full half-turn, giving flexible access to awkward spots without repositioning Ergonomic 45-Degree Design: reduces strain during cleaning by keeping the head at a comfortable angle against the floor, so long scrubbing sessions feel easier on your back Goes Anywhere: cleans tile, hardwood, glass, concrete, and plenty of other household surfaces Durable PP and Iron Construction: built with durable PP material and an iron wire frame, finished with a secure threaded joint that keeps the handle locked firmly in place Specifications Material: Plastic (PP) with an iron wire frame Product Size: 9.44 x 42.91 in (24 x 109 cm) Handle Rotation: 180 degrees Colors: Dark Blue, Dark Green, White Package Includes: Included: 1 x floor scrub brush Right for you if ✓You dread scrubbing grout on your knees — the long handle lets you clean tile and tubs standing up ✓Your grout lines and corners stay dirty — the right-angle bristle head digs into seams flat brushes miss ✓You need one brush for several rooms — it works on tile, hardwood, glass, and concrete alike ✓You have back or joint pain — the rotating handle and angled head cut down on bending and strain If two or more of these sound like you, this is the one. FAQsQ: Can this floor scrub brush be used on hardwood floors?A: Yes — used carefully, with gentle pressure, the stiff bristles clean dirt effectively without scratching the surface.Q: Is the long handle adjustable?A: The handle length is fixed, but its ergonomic angle and rotating head give excellent reach without needing to extend it.Q: Does the scraper edge really help with tough stains?A: Yes — it loosens stuck-on grime, soap scum, and dried mud before you scrub, so the bristles finish the job faster.Q: What colors is it available in?A: Dark Blue, Dark Green, and White, so you can match it to your cleaning caddy or bathroom decor.Q: What is the brush built from?A: A rigid PP plastic body reinforced with an iron wire frame, joined with a threaded connection that locks securely.
$90.87 $69.90
-
Lock Pick Set with Pick Gun, Lockpicking Tool Set with Torsion Key Tool, Credit Card Lock Pick Training Kit
Lockpicking Tool Set with Torsion Key Tool for Credit Card Lock Pick Training Practice locksmithing without real risk: this lock pick training kit lets you learn on a safe credit-card-style trainer No batteries, ready whenever you are: it works with zero charging or battery swaps One kit covers pin locks, cylinders, and key safes: it opens a variety of locks and many key safes too Stop buying tools one at a time: this lock pick set bundles the trainer, padlock picks, blades, and torque tool together Small enough to grab and go: the compact, pocket-sized design travels easily Getting locked out of your own front door, shed, or car is stressful enough without also needing to call a locksmith and wait. This lockpicking tool set with a pick gun and torsion key tool gives you a way to handle it yourself: insert the torque tool, twist, then work the pick gun needle until the pins give way. It runs on nothing but your own hand strength, so there's no battery to charge and no motor to break down.It's built as a beginner lock pick set, so you don't need prior experience to get started, and because it pairs a torque wrench lock pick with a credit-card-style trainer, you can practice on a safe stand-in lock before you ever need it for real. Why choose Tuzwa Lockpicking Training Set Feature Tuzwa Others Works by hand, no batteries needed ✓ Battery only Includes trainer, picks, and torque tool ✓ Extra to buy Opens pin and cylinder locks fast ✓ Slower picks Also works on many key safes ✓ Excluded Compact, pocket-sized carry ✓ Bulkier kits 30-day easy returns ✓ Varies Key Features No batteries needed: It works by hand, so there's never a charge to wait for. Pocket-sized carry: The compact design slips into a pocket or bag with ease. Opens pin locks fast: Works on a variety of pin locks in short order. Full accessory bundle: Comes with a 5-in-1 credit-card-lock trainer, a 6-piece padlock pick set, 4 pick blades, and a torque wrench for turning the pins. Also works on key safes: Compatible with many key safes as well as pin and cylinder locks. Specifications Material: High-quality steel Dimensions: 4.5 x 4.5 x 0.8 inches (11.5 x 11.5 x 2 cm) Package Includes: 1 x Pick gun with torque tool (automatic locksmith extractor) 1 x 5-in-1 training tool for credit card locks 1 x 6-piece padlock pick set 4 x Pick blades 1 x Torsion key How to Use Insert the torque tool into the lock and apply gentle twisting pressure. Slide the pick gun's needle into the same lock. Pull the trigger repeatedly until the pins release and the lock opens. Right for you if ✓You've locked yourself out and don't want to wait — it opens most pin and cylinder locks by hand ✓You've never picked a lock before — it includes a training tool for credit card locks ✓You want one kit instead of buying tools separately — it bundles the trainer, padlock picks, and torque tool ✓You want a backup for key safes too — it works on many key safes as well as pin and cylinder locks If two or more of these sound like you, this is the one. FAQsQ: Do I need batteries for this lock pick set?A: No, it works by hand with no batteries or charging required.Q: What locks can it open?A: Most pin and cylinder locks, plus many key safes.Q: Is it easy to carry around?A: Yes, its compact, pocket-sized design travels easily in a bag or pocket.Q: What's included in the kit?A: A pick gun with torque tool, a 5-in-1 credit-card-lock trainer, a 6-piece padlock pick set, and 4 pick blades.Q: Is this a good lock pick set for someone with no experience?A: Yes, it's built as a beginner-friendly kit you can start using right away.
$97.46 $74.97
-
Lock Pick Gun, Snap Gun Lock Picking Tool, Stainless Steel Locksmith Tool for Pin Tumbler Locks and Padlocks
Lock Pick Gun, Snap Gun Lock Picking Tool, Stainless Steel Locksmith Tool for Padlocks Locked out of your own place, no locksmith in sight: this lock pick gun opens most pin tumbler locks and keyed padlocks in seconds Beginners can use it right away: the semi-automatic trigger engages all the pins at once with a simple pull A stuck door doesn't have to ruin your day: the built-in spring can also help free it open Small enough to keep in the car or a bag: its compact, pocketable size never takes up much room Stays reliable trip after trip: stainless steel with a lacquer coating resists rust and discoloration Getting locked out of your own house, shed, or car happens to everyone eventually, and waiting on a locksmith can eat up your whole afternoon. This lock pick gun is built for exactly that moment: insert it above a pin tumbler lock or keyed padlock, pull the trigger, and the needles flick against the pins to release it in seconds. It's simple enough for a first-time user, and the stainless steel body with a lacquer coating keeps it working smoothly whether it lives in a glovebox or a junk drawer.Unlike a tension wrench and pick set that takes weeks of practice to get right, this snap gun's trigger does the work the moment you pull it, so it's a lockout tool you can actually use the first time you need it. Why choose Tuzwa Trigger Snap Gun Feature Tuzwa Others Opens pin tumbler locks in seconds ✓ Takes practice Semi-automatic trigger, no experience needed ✓ Manual skills Also frees a stuck door ✓ One job only Stainless steel with a lacquer coating ✓ Plain metal Small enough to keep in the car or a bag ✓ Bulkier tool 30-day easy returns ✓ Varies Key Features Never locked out again: Sturdy metal pins slot into the lock, and pulling the trigger flicks the needles against them to open the door quickly. Beginner-friendly operation: Its beginner-friendly design means even non-professionals can easily operate it — insert it into the lock, rapidly engage all the pins at once, and unlock it by pulling the trigger quickly, so you'll never need to call a locksmith again. Opens a variety of locks: Works on many pin tumbler locks, useful whenever you're locked out of your own house or workplace. Discoloration-resistant build: Premium stainless steel with a lacquer coating helps prevent corrosion and discoloration. Frees a stuck door too: A powerful built-in spring can help open a door that's jammed shut. Pocket-sized storage: Small enough to keep in the car or pack in luggage without taking up much room. Also works on padlocks: Beyond pin tumbler locks, it handles numerous keyed padlocks too. Specifications Material: Stainless steel with a lacquer coating Mechanism: Semi-automatic, trigger-operated Compatible locks: Pin tumbler locks and keyed padlocks Extra feature: Built-in spring can help free a stuck door Size: Compact, pocketable design Package Includes:1 x Lock Pick Gun Right for you if ✓You've locked yourself out of your own house before — it opens most pin tumbler locks in seconds ✓You've never picked a lock in your life — the semi-automatic trigger engages the pins for you ✓You keep a spare tool in the car for emergencies — its compact, pocketable size fits in a glovebox or bag ✓A door in your home sometimes sticks — the built-in spring can help free it open If two or more of these sound like you, this is the one. FAQsQ: What locks does this lock pick gun work on?A: Most pin tumbler locks and numerous keyed padlocks.Q: Is it easy for a beginner to use?A: Yes, the semi-automatic trigger engages the pins for you, so no experience is needed.Q: Can it help with a stuck door?A: Yes, a built-in spring can help free a door that's jammed.Q: Will it rust if I keep it in the car?A: No, the stainless steel body has a lacquer coating that resists rust and discoloration.Q: Is it small enough to carry with me?A: Yes, its compact, pocketable size fits in a car or a bag.
$113.70 $87.46
-
Key Lock Box Wall Mounted, Combination Lock Box for Keys, 4 Digit Code Key Box for 5 Keys
Key Lock Box Wall Mounted, Combination Lock Box for Keys, Key Box for Keys Never scribble your code on a sticky note again: a 4-digit combination gives 10,000 possible codes Built to shrug off tampering: zinc alloy and heavy-duty steel stand up to hammering, drilling, and prying Rain or shine, it holds up: all-weather resistant construction handles outdoor conditions year-round Room for the whole spare-key stash: holds up to 5 keys in one compartment Up and running the same day: wall-mounting hardware is included, so there's nothing extra to buy Hiding a spare key under the doormat only works until someone finally checks there. This key lock box wall mounted gives you a place to stash keys that only you, or whoever you trust with the code, can open. Set your own 4-digit combination for up to 10,000 possible codes, and the zinc alloy and heavy-duty steel body stands up to hammering, drilling, and prying, so it stays put and stays locked no matter the weather outside. Why choose Tuzwa Combination Key Lock Box Feature Tuzwa Others 10,000-code combination, no key to lose ✓ Fixed code Zinc alloy and steel resist prying ✓ Thin plastic All-weather, rust-free construction ✓ Indoor only Holds up to 5 keys at once ✓ 1-2 keys Wall-mount hardware included ✓ Not included 30-day easy returns ✓ Varies Key Features Strong security code: A 4-digit combination system offers 10,000 possible codes to keep unauthorized hands out. Rugged construction: A zinc alloy body reinforced with heavy-duty steel resists hammering, drilling, and prying. All-weather protection: The weather-resistant design and protective shutter shield guard against rain, snow, rust, and UV damage. Room for five keys: The spacious interior compartment holds up to 5 keys and keeps them organized. Solid wall mounting: Professional-grade mounting hardware gives it a rock-solid, permanent install. Protective sliding shutter: A sliding cover shields the combination dials from debris and keeps key storage discreet. One-touch release: An ergonomic button gives smooth, quick access once the correct code is entered. Tamper-resistant build: A reinforced locking mechanism and concealed hinges resist manipulation and forced entry. Specifications Security Type: 4-digit combination Combination Options: 10,000 codes Material: Zinc alloy Capacity: 5 keys Construction: Heavy-duty steel Weather Rating: All-weather resistant Mounting: Wall-mount Security Features: Anti-drill protection Access Method: Push-button release Cover Type: Sliding shutter Installation: Hardware included Usage: Indoor/Outdoor Protection: Rust-free Package Includes:1 x Lock Box For KeysHow to Use Slide back the protective shutter so the combination dials are visible. Dial in your personal 4-digit code. Press the release button to open the box right away. To lock it again, close the shutter and scramble the dials. Right for you if ✓You've hidden a spare key outside before — a 4-digit combination gives 10,000 possible codes ✓You need it to survive rain and sun — the all-weather, rust-free build handles outdoor conditions ✓You want to share access with a dog sitter or cleaner — it holds up to 5 keys with easy push-button access ✓You're mounting it on an exterior wall or door — mounting hardware is included for a solid installation If two or more of these sound like you, this is the one. FAQsQ: How many codes can I set with the combination lock?A: The 4-digit dial supports 10,000 possible codes, so you can pick a combination that's easy for you to remember.Q: How many keys does it hold?A: Up to 5 keys fit inside the spacious compartment, keeping them organized in one place.Q: Can I mount it outdoors?A: Yes, it's built with an all-weather resistant, rust-free design for indoor or outdoor use.Q: How do I open it?A: Slide the shutter, dial your code, and press the release button for instant access.Q: Does it come with mounting hardware?A: Yes, wall-mounting hardware is included for a solid, permanent installation.
$94.77 $72.90
-
Rechargeable Flashlight, EDC Flashlight with Magnetic Base, Mini Keychain Flashlight for Everyday Carry
Rechargeable Flashlight and EDC Flashlight, Keychain Flashlight with Magnet for Everyday Carry Never fumble in the dark: up to 650 lumens clips onto your keys, so light is always within reach Ready for emergencies: a red/blue strobe mode stands by whenever you need to signal for help Work hands-free: the magnetic base clings to metal surfaces so both your hands stay free Skip the battery aisle: a USB-C rechargeable battery keeps it lit for up to 12 hours on a charge Keeps working when the day gets rough: rated IPX4 and shock-resistant to 6.6 ft, rain or a hard knock won't stop it Fumbling for your phone's flashlight in the dark gets old fast, and it drains your battery besides. Clipped to your keys, this rechargeable flashlight is always exactly where you need it as an everyday carry flashlight — up to 650 lumens from a pocket flashlight small enough to disappear in your palm, with a red/blue strobe mode standing by for emergencies. Rain or a hard knock won't stop it: it's water-resistant to IPX4 and shock-resistant to 6.6 ft (2 meters), so it keeps working after the day gets rough.As an EDC flashlight it works just as well as a keychain torch clipped to your ring, or a compact flashlight tossed in the glovebox. Its lightweight aluminum alloy and ABS body makes it a durable flashlight for daily use, and the magnetic base frees your hands for close-up work. The USB-C rechargeable 675mAh battery keeps it lit for up to 12 hours on a charge. Why choose Tuzwa Keychain EDC Flashlight Feature Tuzwa Others Up to 650 lumens from a pocket-sized body ✓ ✕ Red/blue strobe mode ready for emergencies ✓ ✕ Magnetic base for hands-free lighting ✓ No magnet USB-C 675mAh battery runs up to 12 hours ✓ Less runtime Rated IPX4 and shock-resistant to 6.6 ft ✓ Less rugged 30-day easy returns ✓ Varies Key FeaturesThere's more to this mini torch than its size suggests: Bright and compact: delivers up to 650 lumens from a pocket-sized body built for everyday carry Versatile lighting modes: switches between a normal beam and a red/blue strobe for emergencies Magnetic base: clings to metal surfaces for hands-free lighting while you work USB-C rechargeable: a 675mAh battery charges over USB-C and runs for up to 12 hours Durable and water-resistant: rated IPX4 and built to handle a 2-meter drop without missing a beat Lightweight build: aluminum alloy and ABS keep it light enough to carry without noticing it's there Specifications Brightness: up to 650 lumens Battery capacity: 675mAh Runtime: up to 12 hours Waterproof rating: IPX4 Shock resistance: 2-meter Material: aluminum alloy and ABS Package Includes:1 x Keychain Flashlight Right for you if ✓You want light within reach at all times — it clips onto your keys as an everyday carry flashlight ✓You need both hands free sometimes — the magnetic base holds it in place for you ✓You're out in the rain or drop things — it's rated IPX4 and shock-resistant to 6.6 ft ✓You don't want to buy batteries — the USB-C 675mAh battery runs up to 12 hours per charge If two or more of these sound like you, this is the one. FAQsQ: How bright is this mini flashlight?A: Up to 650 lumens, bright enough for most everyday tasks and for emergencies alike.Q: Is this a good small flashlight for a keyring?A: Yes, its compact, lightweight build and magnetic base make it an easy keyring companion you'll actually carry.Q: How long does the battery last on a charge?A: The USB-C rechargeable 675mAh battery keeps this flashlight lit for up to 12 hours on a single charge.Q: Is it water-resistant?A: Yes, it's rated IPX4 for water resistance and also shock-resistant to a 2-meter drop.Q: What is the flashlight made of?A: Lightweight aluminum alloy and ABS, built to hold up to daily carry.
$84.45 $64.96
-
Magnifying Glasses with Light, LED Magnifying Glasses with 8x 15x 23x Lenses, Head Mounted Magnifier with LED Light
Head Mounted Magnifying Glasses with LED Light for 8x 15x and 23x Magnification Three magnification levels, one pair: swap between 8x, 15x and 23x lenses on these led magnifying glasses without switching tools. Less eye strain on long jobs: alternate between two lens barrels on this magnifier with led light to cut down on fatigue. See in dim light too: two adjustable lights make these magnifying glasses with light ready for low-light detail work. Wear it your way: this head mounted magnifier switches between an eyeglass frame and a headband for a snug fit. Everything you need, included: six button batteries power the lights, so nothing extra to buy separately. Small engraving, jewelry appraisal or watch repair all demand a level of detail your eyes can't quite reach on their own, and a handheld magnifier ties up one hand you need for the work itself. These magnifying glasses with light free up both hands and add their own illumination, so fine work doesn't depend on the room's overhead lighting. Worried about which lens fits the job? Three interchangeable magnifications mean you're never stuck with the wrong strength.Switch between 8x, 15x and 23x magnification depending on how close the detail is, and alternate between the two lens barrels on long jobs to keep eyestrain down. A detachable bracket lets you wear it as an eyeglass frame or swap to a headband, whichever sits more comfortably for the task, and two movable LED lights — powered by six included button batteries — turn on with a quarter turn of the switch cover. Why choose Tuzwa LED Magnifying Glasses Feature Tuzwa Others 3 magnifications: 8x, 15x, 23x ✓ 1 strength Built-in LED lights, batteries included ✓ No light Wears as glasses or a headband ✓ Glasses only 2 lens barrels reduce eyestrain ✓ Single barrel Acrylic lens and ABS construction ✓ Basic plastic 30-day easy returns ✓ Varies Key FeaturesWhat's built into this magnifier beyond the lenses: Three Magnification Levels: Switch instantly among three different levels of magnification without changing tools. Alternating Lens Barrels: Use the two lens barrels in turn during long sessions to cut down on eyestrain. Eyeglass Frame or Headband: Swap the detachable bracket between an eyeglass frame and a headband, whichever sits snug with less fatigue over a long session. LED Lights for Low Light: Two adjustable LED lights help you see in dim conditions, and six button batteries come included. Specifications Materials: Acrylic optical lens and ABS Magnification: 8x, 15x, 23x Product weight: 4.1 oz (115g) Lens barrels: 2 (alternated for extended use) Batteries included: 6 x button batteries LED switch rotation: 30 degrees clockwise Ideal viewing distance: 0.4 to 2 in (1 to 5 cm) Package Includes:1 x LED Magnifier for GlassesHow to UseGive the switch cover a quarter turn clockwise, from the dot to the lamplight mark, to switch the LED lights on.Notes Small variations are normal here since every measurement is taken by hand — please allow for slight differences between units. Lighting and display settings can cause some variation, so the item's real color may look somewhat different from the image shown for it. These lenses zoom in with too much magnification for comfortably reading a book. For the sharpest focus, keep whatever you're examining about 0.4 to 2 in (1 to 5 cm) from the lens — that's the ideal viewing distance. Right for you if ✓You do fine detail work like engraving or jewelry appraisal — 3 magnifications cover close and closer ✓Your workspace lighting isn't enough on its own — 2 adjustable LEDs add light right at the lens ✓You need both hands free for the task — it wears hands-free as glasses or a headband ✓You work in long sessions — alternating between 2 lens barrels cuts down on eyestrain If two or more of these sound like you, this is the one. FAQsQ: What magnification levels are available?A: Three — 8x, 15x and 23x — so you can switch strength to match the detail you're working on.Q: Can I wear it as glasses or a headband?A: Both — the detachable bracket switches between an eyeglass frame and a headband, whichever fits better.Q: Does it come with lights?A: Yes — two adjustable LED lights help with low-light detail work, powered by six included button batteries.Q: How do I turn the lights on?A: Spin the switch cover 30 degrees clockwise from the dot to the lamplight mark.Q: What's the ideal distance to hold what I'm examining?A: Between 1 and 2 in (5 cm) from the lens for the sharpest focus; it's too strong for comfortably reading a book.
$86.97 $66.90
-
Rechargeable Flashlight, High Lumen LED Flashlight with Power Bank, Solar Searchlight Torch with Warning Light
Rechargeable Flashlight Torch with Solar Charging, LED Searchlight and a Built-In Power Bank See everything, not just what's in front of you: three light sources — bidirectional led flashlight beams plus a COB flood light — combine for wide, clear coverage outdoors or during a power outage. Get noticed on the roadside: flip to the red and blue warning light mode built right into the switch. Your phone's backup battery, too: it works as a flashlight with power bank, so a dead phone isn't a dead end. Charge it any way the day allows: top it up with solar panels or a USB cable, whichever is on hand. Steady on uneven ground: mount it on a tripod for stable, hands-free lighting outdoors. A power outage or a late-night walk to the car shouldn't mean fumbling with a phone flashlight that dies in twenty minutes. This rechargeable flashlight torch runs on a high-capacity lithium battery and switches between headlight and floodlight beams to match whatever you're doing. Worried about getting caught in the rain? It's built water-resistant, so a drizzle on the trail or a wet garage floor won't put it out.As a high lumen flashlight it puts out 1000 lumens across two switches — four headlight modes on one side, three floodlight modes and a red-and-blue warning light on the other. Charge it like a solar flashlight when you're outdoors, or plug into USB when you're not; either way it's ready again in a few hours. Why choose Tuzwa Rechargeable Flashlight Torch Feature Tuzwa Others 1000 lumens from 3 light sources ✓ Fewer lumens Solar or USB charging, either works ✓ USB only Doubles as a phone power bank ✓ ✕ Red/blue warning mode for roadside ✓ ✕ Mounts on a tripod for steady light ✓ Handheld only 30-day easy returns ✓ Varies Key FeaturesBeyond the beam, this doubles as a solar powered light and a handheld spotlight for almost anything you're doing outdoors: Built-In Lithium Battery, Long Runtime: A high-capacity lithium battery keeps it lighting for 2.5 to 8 hours depending on which mode you're running. Rain and Splash Resistant, IP44 Rated: It protects against rain and splashes, adding reliability in various weather conditions at an IP44 rating. Solar and USB Charging: A high-efficiency solar panel and USB interface give you multiple ways to recharge it. USB Output for Devices: The USB port lets you charge a phone or other device too, adding extra versatility. Three Light Sources, 1000 Lumens: Bidirectional lighting and a COB flood light combine for 1000 lumens of robust, clear brightness. Two Separate Switches: The left one handles the side headlight across 4 modes, the right handles the floodlight across 3, with a red/blue warning light built in. Non-Slip, Compact Design: A strong grip and compact size keep it durable and portable for on-the-go use. High, Low and Emergency Settings: Switch among high, low or emergency light settings to match the situation. Tripod Compatible: Mount it on a tripod for stable, hands-free lighting on uneven ground. Multi-Use Light: It works as a flashlight, searchlight, lantern or emergency light, whichever you need at the moment. Specifications Power Source: Rechargeable battery Lamp Body Material: ABS Color Temperature (CCT): 4100K (Neutral White) Lighting Period: 5 hours IP Rating: IP44 Color: Black Light Source: LED Product Weight: 0.5 lb (0.22 kg) Brightness: 1000 lumens Runtime (per charge): 2.5 to 8 hours, depending on mode Switch modes: Left switch: 4 modes; right switch: 3 modes Package Includes: 1 x searchlight 1 x USB charging cable Right for you if ✓You lose power at home or on the trail — the battery runs 2.5 to 8 hours per charge ✓Your phone dies right when you need it — the built-in power bank charges it back up ✓You need to be seen on the roadside — a dedicated red/blue warning light mode is built into the switch ✓You want hands-free light outdoors or at home — it mounts on a tripod for stable use If two or more of these sound like you, this is the one. FAQsQ: How bright is this 1000 lumen flashlight?A: It puts out 1000 lumens combined from the headlight and floodlight sources.Q: How long does it run before needing a charge?A: Anywhere from 2.5 to 8 hours, depending on the mode you're using.Q: Can I charge it without an outlet?A: Yes — the solar panel or the built-in power bank both work, alongside a standard USB charge.Q: Is this portable flashlight good for emergencies?A: Yes — as an emergency flashlight it switches among high, low and emergency settings, plus a red/blue warning light for the roadside.Q: Can it stand on its own?A: Yes — as a spotlight flashlight it mounts on a tripod for stable, hands-free lighting.
$94.77 $72.90
-
Emergency Lights for Vehicles, Rechargeable LED Work Light with COB Head, Emergency Light for Car Roadside Use
Rechargeable LED Emergency Lights for Vehicles with an Adjustable COB Work Light Ready before you need it: keep this emergency light in your glove compartment or emergency kit for any roadside car repair. See what you're fixing, not just where you're parked: the COB head throws a wide, even beam, so it doubles as a led work light under the hood. One light, four ways to use it: switch between white, yellow, natural and red so it works as an emergency light for car roadside use or general maintenance tasks. Know your charge before you need it: the four-stage battery display tells you roughly how much runtime is left. Aim it exactly where you're working: the head adjusts through 180° so the light follows your hands. A dead battery or a flat tire never happens somewhere convenient, and fumbling with a phone flashlight while you work under the hood is nobody's idea of fun. This rechargeable emergency light for vehicles gives you both hands free, with a COB head bright enough to actually see what you're doing. Worried about getting caught in the rain while you're stuck on the shoulder? It's built water-resistant, so a passing drizzle isn't a dealbreaker.Two separate switches split the job: one cycles through 14 modes across four color temperatures, the other steps through strong, medium and low intensity, so this rechargeable work light adjusts to whatever you're doing. It charges over USB-C like a portable work light should, and the COB design gives it the same broad, even spread as a dedicated cob light. Why choose Tuzwa Emergency Work Light Feature Tuzwa Others 14 modes across 4 colors, 3 levels ✓ Few settings COB head angles through a full 180° ✓ ✕ 4-stage battery display, no guessing ✓ No display Two switches split power and color ✓ 1 switch USB-C charging like your other devices ✓ Bulky adapter 30-day easy returns ✓ Varies Key FeaturesThere's more packed into this mechanic light than a single beam: 14 Lighting Modes: Cycle through white, yellow, natural and red color settings, each at strong, medium or low intensity. 180° Adjustable Head, Precision Angle Control: The head offers multi-directional illumination for perfect lighting on every maintenance or emergency task. Split Switch Control: One switch handles power, the other handles color temperature, so changing between modes feels seamless and illumination stays optimal. Four-Stage Battery Display: An LED display shows roughly how much power is left, so unexpected power loss is less likely. Professional COB Illumination: High-efficiency COB LED technology delivers consistent brightness for up to about 4 hours. Water-Resistant, All-Weather Build: Construction with EMS-certified durability keeps it dependable outdoors in challenging conditions. USB-C Charging: Type-C USB charging compatibility means it works with the same cable as many modern devices. Compact, Stress-Tested Design: A compact, stress-tested build combines a penetrating beam with endurance for emergency readiness. Specifications Modes: 14 Colors: White/Yellow/Natural/Red Intensity: Strong/Medium/Low Runtime: 2-4h LED Type: COB Charging: USB-C Rotation: 180° Size: About 2.36inch x 2.17inch x 0.98 inch (6 x 5.5 x 2.5 cm) Battery Display: 4-level Controls: Dual switch Protection: Water-resistant Build: EMS-certified Material: Anti-stress Size: Mini Power: LED display showing battery level Battery display readings: 100%, 75%, 50%, or 25% Color: Black, Khaki Package Includes: 1 x Emergency Light for Vehicles 1 x Charging Cable Right for you if ✓You keep an emergency kit in the car — this rechargeable light covers roadside repairs and breakdowns ✓You want to see what you're fixing under the hood — the COB head throws a wide, even beam ✓You hate guessing how much charge is left — the 4-stage display shows the level at a glance ✓You want one light for repairs, warnings and reading a map — it switches between 4 color modes If two or more of these sound like you, this is the one. FAQsQ: How many lighting modes does it have?A: 14 modes across four color temperatures — white, yellow, natural and red — each with strong, medium or low intensity.Q: How long does it run on a charge?A: About 2 to 4 hours, depending on the mode and intensity you use.Q: How do I charge it?A: Through the USB-C port; the charging cable is included.Q: Can I use the red mode as a warning light?A: Yes — the red setting doubles as a roadside warning light alongside the white, yellow and natural modes.Q: How do I know how much charge is left?A: The four-stage LED battery display shows the level at 100%, 75%, 50% or 25%.
$103.87 $79.90
-
Sewing Machine Presser Foot, Roller Foot for Leather and Denim, High Shank Industrial Sewing Machine Parts
Sewing Machine Presser Foot, Roller Foot for Leather and Denim, Industrial Sewing Machine Parts A sewing machine foot that won't let fabric slip: the roller rotates to feed both layers evenly, without puckering or slipping Handles the hard-to-feed materials: sews cleanly through leather, denim, fur, suede, synthetics and other napped or piled fabrics Cuts friction where it counts: less drag between the foot and the feed dog gives you more control No complicated setup: it is lightweight and easy to assemble before you get sewing Built to outlast the job: premium steel resists rust for long-term use on the machine Feeding leather, denim or a slippery synthetic through your machine usually means fighting puckered seams or fabric that creeps out of alignment. This roller presser foot rotates as it sews, feeding the upper and lower layers at the same time so nothing bunches or slides out of place. It handles stretchy materials like jerseys and knits just as well as difficult-to-feed materials like leather or vinyl, so the seam comes out even whether the fabric wants to stretch or resist.The rotating action also cuts friction between the foot and the feed dog, giving you more control while you sew or quilt leather, denim, fur, suede, synthetics, and other napped or piled fabrics. It is built for leather, plastics, nylon, foam rubber, and laminated fabrics too, so one foot covers a wide range of sewing projects. It fits high-shank industrial sewing machines, including high-head and flat-bed models, and comes in three sizes, S, M and L, so you can match it to your machine and project. Why choose Tuzwa Roller Presser Foot Feature Tuzwa Others Rotating foot feeds both layers evenly ✓ One direction Sews leather, denim, fur and suede cleanly ✓ Puckers easily Less friction against the feed dog ✓ More drag Steel build resists rust over time ✓ Plastic body Comes in three sizes, S, M and L ✓ 1 size 30-day easy returns ✓ Varies Key Features Rotating Feed Action: The foot rotates to move both fabric layers together, so stretchy jerseys and knits or hard-to-feed leather and vinyl come through without puckering or slipping. Reduced Friction: Less friction between the foot and the feed dog gives you more control while sewing or quilting leather, denim, fur, suede, synthetics, and other napped or piled fabrics. Easy Setup, 3 Sizes: It goes together easily, stays light and portable, and comes in three sizes, S, M, and L. Durable Steel Build: The steel construction is strong, long-lasting, resists rust, and is environmentally friendly. Specifications Material: Premium steel Available Sizes: S (0.8 in)0.9 in (2.3 cm) (, M)1.1 in (2.8 cm) (, L) Compatible Fabrics: Leather, denim, fur, suede, synthetics, napped or piled fabrics; also leather, plastics, nylon, foam rubber, laminated fabrics Machine Fit: High-shank industrial sewing machines, including high-head and flat-bed models Package Includes:1 x Leather roller presser footHow to Use Attach the presser foot to your machine, then move the needle all the way to the left so it sits next to the foot's wheel. Line up the trim's flange with the fabric's raw edge on the right side, then sew along the trim as you attach it to the cloth. Place the second piece of fabric right side down with the raw edges aligned, then stitch through all the layers on top of your first line of stitching, using the same settings as before. ApplicationsBeyond leather, this foot handles plastics, nylon, foam rubber and laminated fabrics too, making those trickier sewing jobs go faster with less fuss. Right for you if ✓You sew leather, denim or other hard-to-feed fabric — the roller feeds both layers without slipping ✓You work with stretchy jerseys or knits — the rotating foot stops puckering as you sew ✓You want less drag while you sew or quilt — friction against the feed dog is reduced ✓You need a size to match your project — it comes in three sizes, S, M and L If two or more of these sound like you, this is the one. FAQsQ: What fabrics can I sew with this presser foot?A: It handles leather, denim, fur, suede, synthetics, napped or piled fabrics, plastics, nylon, foam rubber, and laminated fabrics.Q: Will it work with my sewing machine?A: It fits high-shank industrial sewing machines, including high-head and flat-bed models.Q: What sizes does it come in?A: It comes in three sizes, S (0.8 in)0.9 in (2.3 cm) (, M), and L (1.1 in).Q: How do I attach it to my machine?A: Attach it to the machine and move the needle to the far left so it sits next to the foot's wheel.Q: Will it hold up over time?A: Yes, it is built from premium steel that resists rust for long-term use.
$77.87 $59.90
-
Manual Lawn Edger, Garden Edger with Adjustable Handle, Lawn Edging Tool for Sidewalk and Driveway, Garden Tool
Manual Lawn Edger and Garden Edger with Adjustable Handle for Sidewalk and Driveway Edging A garden tool you can use standing up: the handle adjusts to your height, so there's no bending An edging tool built for straight lines: the rolling base guides it evenly along every border A lawn edging tool for hard surfaces: cuts a clean line between grass, sidewalks and driveways Compact enough to tuck away: the lightweight frame is easy to carry and store when you're done Comfortable through a full yard session: the ergonomic grip eases strain on your hands and knees You want crisp, professional-looking edges along your sidewalk and driveway without fighting a machine or bending over a hand tool for an hour. This manual lawn edger rolls along the border while you stand upright, cutting a clean line between grass and hard surface in a single steady pass. Because the handle adjusts to three lengths, you set it to your own height, so there is no stooping and no strain on your back or knees by the time you finish the yard.Push the rolling base along the edge and the wheels guide it in a straight line, so this grass edger and driveway edger cuts an even border without wandering off course. It is built as a lightweight, practical gardener tool, easy to maneuver over sidewalks, driveways and garden beds, and it works just as well as a sidewalk edger for walkways or a landscaping tool for shaping flower bed lines. The compact frame folds down small enough to store in a shed or garage between sessions. Why choose Tuzwa Adjustable Lawn Edger Feature Tuzwa Others Handle adjusts to three heights for upright edging ✓ Fixed height Rolling base guides a straight, even edge ✓ ✕ Ergonomic grip eases hand and back strain ✓ Basic grip Lightweight frame is easy to store ✓ Bulkier build Works on garden beds, sidewalks and driveways ✓ Varies 30-day easy returns ✓ Varies Key FeaturesThis yard tool has more going for it as a lawn care tool, starting with an ergonomic grip built for repeat use: Standing Height Adjustment: The handle locks into three lengths, 30.7 in (78 cm), 44.5 in (113 cm) or 58.3 in (148.1 cm), so you edge from an upright standing position instead of stooping. Rolling Base: The rolling base delivers steady movement as you push it evenly along the lawn's edges. Compact Frame: The frame stays small and light, so it is easy to carry out to the yard and tuck away when the job is done. Specifications Length options: 30.7 in (78 cm), 44.5 in (113 cm), 58.3 in (148.1 cm) Handle type: Ergonomic grip Motion: Manual push trimming Application: Garden beds, sidewalks, driveways Package Includes: 1 x Lawn edger with adjustable length 1 x Instruction manual DesignThe lightweight build keeps this edger easy to maneuver even through extended yard work, and ergonomic touches carry through to the handle, which is shaped to minimize strain on your hands, back and knees so discomfort during use stays low and longer sessions cost less physical fatigue. Right for you if ✓You dread bending over to edge the lawn — the handle adjusts to three heights so you stand upright ✓You want clean lines along your driveway — the rolling base guides a straight edge every pass ✓You want a tool that's simple to carry and put away — the compact frame is light enough to store ✓You want a simple tool with no engine or cords — it runs on a manual push motion alone If two or more of these sound like you, this is the one. FAQsQ: Is the lawn edger heavy to use?A: No, it is built lightweight, so it stays easy to push and maneuver through a full edging session.Q: Will it cut cleanly on uneven ground?A: It is designed for hard, relatively even surfaces like sidewalks and driveways, and edges best there.Q: Does it require assembly?A: Only minimal assembly, and the instruction manual in the box walks you through it.Q: How often should the blade be sharpened?A: Frequency depends on how often you use the edger and the conditions you use it in. Keep hands and feet clear of the cutting edge while you work.Q: What surfaces is this garden edging tool made for?A: It is built to trim defined lines along garden beds, sidewalks and driveways.
$127.27 $97.90
-
Dethatching Rake for Lawn, Thatch Rake with Long Handle, Manual Lawn Dethatcher, Garden Tool for Dead Grass Removal
Dethatching Rake for Lawn, Thatch Rake with Long Handle, Manual Lawn Dethatcher One garden tool clears a season of thatch: stainless steel and alloy steel tines pull dead grass and debris out fast No more bending over the whole lawn: three rake rods combine into a long-reach pole about 52.8 in end to end Your lawn breathes and grows thicker: raking out thatch opens the soil so air, water and nutrients reach the roots Rake a whole yard without a sore grip: the ergonomic handle and lightweight build stay comfortable through a full session Small yard or a sprawling garden, one pass: the tines gather loose grass and debris fast for quick cleanup Every spring your lawn comes out of winter matted with dead grass and thatch that block new growth before it starts. Reaching across a wide lawn with a short rake means bending over the whole time, so this manual lawn dethatcher solves it with three rake rods that click together into a long-reach pole, letting you stand upright and pull dead grass and debris out row by row.Once the thatch is gone, the same tool keeps working: it doubles as an everyday gardening tool and lawn rake, a lawn care tool for routine yard care, and folds back down into three short rods — a compact yard tool for off-season storage. Why choose Tuzwa Dethatching Rake Feature Tuzwa Others Alloy and stainless steel tines pull thatch fast ✓ Plastic tines Three rods combine into one long-reach pole ✓ Short handle Ergonomic handle stays comfortable all session ✓ Bare metal Lightweight build swings easily all lawn long ✓ Heavier head Total length reaches about 52.8 in ✓ Shorter reach 30-day easy returns ✓ Varies Key FeaturesThis dethatching rake also earns its keep as a garden rake and dethatching tool for regular upkeep: Stainless Steel Tines: alloy and stainless steel points pull thatch and dead grass loose without bending. Ergonomic Handle: shaped to sit comfortably in your grip through a full dethatching session. Lightweight Design: a light build keeps the long rake easy to swing across the whole lawn. Effective Thatch Removal: the tine pattern is built to strip matted thatch out of the turf. Promotes Aeration: pulling thatch loose opens the soil surface so air can reach the roots. Enhances Lawn Health: clearing old thatch gives new grass room to take hold and thicken. Quick Debris Cleanup: gathers loose grass and yard debris in fewer passes. Comfortable Handling: the light frame and shaped grip keep the rake easy to control for the whole job. Professional-Grade Tool: built to hold up under regular, repeated use season after season. Versatile Use: works across small backyards and larger gardens alike. Specifications Material: Stainless Steel, Alloy Steel Total Length After Combination: Approx. 52.8in/134cm Length Of Single Pole: Approx. 15.7in/40cm Rake Head Size: Approx. 128 x 94.5 x 48.4in/325 x 240 x 123cm Package Includes: 1x Easy Dead Grass Remover 3x Rake Rods Right for you if ✓Your lawn comes out of winter matted with thatch — the tines pull dead grass and debris out ✓You do not want to bend over a whole lawn — three rods combine into a 52.8 in long-reach pole ✓You need a rake light enough for a full session — the ergonomic handle and lightweight build stay comfortable ✓You maintain more than a small patch of grass — the tool works across small backyards and larger gardens alike If two or more of these sound like you, this is the one. FAQsQ: What does a dethatching rake actually remove from my lawn?A: It pulls loose, matted thatch and dead grass out of the turf so new grass can grow.Q: How long is this manual lawn dethatcher once assembled?A: The three rake rods combine into a pole about 52.8 in (134.1 cm) long for reaching a whole lawn.Q: What are the tines made of?A: Stainless steel and alloy steel, built to pull through matted thatch without bending.Q: Is this garden tool heavy to use for a whole yard?A: No, the lightweight design and ergonomic handle make it easy to use for long sessions.Q: What comes in the box with this thatch rake?A: One rake head and three rake rods that assemble into the full dethatcher, then break down into a compact yard rake.
$116.87 $89.90
-
Weeding Tools for Garden, Stand Up Weed Puller for Lawn, Bladeless Weed Removal Tool, Hand Weeder Gift for Gardeners
Bladeless Stand Up Weed Puller and Hand Weeder for Garden and Lawn Weeding No more aching back: the pedal design lets you weed standing up instead of bending over Weeds pulled at the root: this weed removal tool's lever action pulls them out, even on muddy ground Built to last for years: these weeding tools have a hard-wearing frame built for your weight and to last Safe for the whole family: the bladeless design means young and old can use it safely, and it makes a genuine gift for gardener friends and family Clears your yard fast: it can weed about 100 square meters of ground in just a few hours Pulling weeds by hand means kneeling in the dirt and standing back up with an aching back before you're halfway across the yard. Among weeding tools for the garden, this stand up weed puller and weed removal tool keeps you on your feet: step on the pedal, let the crossbar and non-slip claws grip the weed, and the lever principle pulls it out at the root, even in muddy ground. Because the tool is bladeless, nothing sharp comes near your hands, so anyone in the family can use it safely, and it makes a genuine gift for gardener friends and family.As a manual garden tool it takes over jobs you might reach for a gardening tool, a garden hoe, or a lawn mower to finish, and spares you the fumes of a herbicide spray. Skip hauling out a tiller, a weed eater, or a leaf blower for one stray weed — this aluminum hand weeder handles it in a single pedal press. Why choose Tuzwa Stand Up Weed Puller Feature Tuzwa Others Pulls weeds out at the root with one pedal press ✓ ✕ Non-slip claws grip the weed at the crossbar ✓ ✕ Lets you weed standing up, no bend required ✓ Bend required Aluminum frame supports your weight on the pedal ✓ Plastic Weeds a large lawn area in just a few hours ✓ Varies 30-day easy returns ✓ Varies Key Features Crossbar Grip: the crossbar's non-slip claws clamp onto the weed before you pull. Lever-Action Removal: pressing the pedal drives the lever principle, pulling the weed out at the root even in muddy soil. Specifications Material: Aluminum Weeding Coverage: About 100 square meters in a few hours, tested next to a lawnmower Package Includes:1 x Weed PullerPerformanceIn testing next to a lawnmower, this weeder cleared about 100 square meters of ground in just a few hours.Safety WarningsBecause there is no blade anywhere on the tool, it stays easy and safe to use.The design suits young and old alike, however experienced they are in the garden.DesignEspecially useful for elderly gardeners, the tool is built from aluminum strong enough to support your weight when you step on the pedal, and it is designed as a hard-wearing garden tool meant to last for years. Right for you if ✓Bending over to pull weeds leaves your back sore — the pedal design lets you weed standing up ✓You want a garden tool built to last for years — the aluminum frame is hard-wearing ✓You want a tool a young helper could try safely — the bladeless design is safe for young and old ✓You're shopping for a gift for someone who loves gardening — it is a genuine gift for garden enthusiasts If two or more of these sound like you, this is the one. FAQsQ: How does this weed puller remove weeds without a blade?A: The crossbar and non-slip claws grip the weed while the lever principle pulls it out at the root.Q: Can I use this stand up weed puller without bending over?A: Yes, you press the pedal and pull the handle while standing, so you never kneel or bend over.Q: Is the hand weeder tough enough for muddy soil?A: Yes, the lever action pulls weeds out at the root even on muddy ground.Q: How large an area can this garden weeding tool clear?A: In testing it weeded about 100 square meters of lawn in just a few hours.Q: Is this weeder safe for young and old gardeners to use?A: Yes, the bladeless design is suitable for young and old alike.
$90.87 $69.90
-
Manual Wire Stripper Hand Tool, Drill Powered Copper Wire Stripping Machine, Cable Stripper for Scrap Wire Recycling
Manual Wire Stripper Hand Tool with Drill Powered Wire Stripping Machine Option Strip wire without ruining it: three precision feeding holes size the wire so blades never chew through the copper Go from hand tool to power tool: this manual wire stripper hand tool also connects to a drill for high speed stripping Built to survive a working shop: a carbon steel frame and stainless steel blades hold up to daily copper wire recycling One tool, every cable type: as a cable stripper it handles twisted pair, optical fiber, copper core and aluminum wire without swapping parts Set up once, strip all day: as a workshop tool it mounts to a workbench, or detaches to travel anywhere the job takes you Stripping wire by eye wastes copper and wastes time — a slipped blade means starting the cut over. This manual wire stripper hand tool uses three precision feeding holes so the cable sits at the right depth before the blade ever touches it, and the depth between roller and blade adjusts for a clean strip instead of a nicked core. For bigger jobs, the same wire stripping machine mounts a drill in place of the hand crank, so scrap wire recycling runs at drill speed instead of hand speed.Underneath, it's built like a workbench tool meant to stay in service: a carbon steel frame carries stainless steel blades, and mounting holes let it sit fixed to a bench or travel to the job in one hand thanks to the detachable handle. As an electrical wire stripper and copper wire stripper in one, it moves between twisted pair, optical fiber, copper core and aluminum wire without a tool change. Why choose Tuzwa Manual Wire Stripper Feature Tuzwa Others Three feeding holes size wire automatically ✓ ✕ Works by hand or mounted to a drill ✓ Hand only Carbon steel frame, stainless steel blades ✓ Basic steel Handles cable from thin to thick gauge ✓ Limited range Detachable handle, three hole sizes ✓ Fixed handle 30-day easy returns ✓ Varies Key Features Dual Operation System: choose the manual handle for close control, or connect a drill for faster stripping. Advanced Material Build: a carbon steel frame carries stainless steel blades built for years of use. Comprehensive Wire Handling: three precision adjustment holes size wire for a clean strip. Multi Cable Compatibility: strips twisted pair, optical fiber, copper core and aluminum wire. Secure Mounting Design: pre-drilled mounting holes hold it to a workbench, or carry it to another location. Precision Depth Control: fine-tune the gap between roller and blade for a clean, consistent strip. Ergonomic Operation: the detachable handle keeps control smooth while easing hand fatigue on long jobs. Professional Performance: a durable build is made for harsh environments and copper wire recycling work. Specifications Construction: Carbon Steel Frame Material: Iron Blade Type: Stainless Steel Wire Capacity: 1 to 70mm² Operation Options: Manual and Drill Feeding Holes: Three Sizes Base Design: Mounting Holes Handle Style: Detachable Depth Control: Adjustable Cable Compatibility: All Standard Types Environment Rating: Heavy Duty Package Includes:One manual wire stripper Right for you if ✓You strip a lot of wire by hand — three feeding holes size it for you ✓You want speed for bigger jobs — it also mounts to a power drill ✓You work with mixed cable types — it handles twisted pair, fiber, copper and aluminum ✓You need it to survive a busy shop — the frame is carbon steel with stainless blades If two or more of these sound like you, this is the one. FAQsQ: Can this wire stripper be used with a drill?A: Yes — it's a dual operation tool, so you can strip by hand or connect it to a drill for high speed stripping.Q: What wire sizes does it handle?A: It's built for wire from 1 to 70mm², using three feeding holes sized for different diameters.Q: What cable types can it strip?A: Twisted pair, optical fiber, copper core and aluminum wire all work with the same tool.Q: What are the blades made of?A: The frame is carbon steel and the blades are stainless steel, built for repeated daily use.Q: Is it safe to use around children or in a busy workshop?A: Keep hands clear of the blades while feeding wire, and store the tool out of children's reach when it's not in use.
$129.92 $99.94
-
Magnifying Glasses with LED Light, Jewelers Loupe Headband Magnifier for Watch Repair, Reading Magnifier Glasses 10X
Magnifying Glasses with LED Light and a Jewelers Loupe Headband Magnifier for Precision Work See fine print without holding a thing: the headband holds these reading magnifier glasses in place, hands-free, for hours of close work Built for watch and jewelry precision: interchangeable 10X, 15X, 20X, and 25X lenses turn this into a jewelers loupe you wear, not hold Two LED eye patches banish shadows: left and right LED lighting brightens your work area so no detail goes unseen Swap lenses in seconds: four magnification strengths click in and out to match whatever precision task you're doing A secure, adjustable fit: the interchangeable headband and bracket keep it snug through long repair sessions Most loupes make you choose between magnification and comfort — hold one up to your eye and your hands are busy, set it down and the detail disappears. This headband-mounted magnifier solves that by putting the lens, the light, and the fit all in one wearable unit. Built from ABS and glass, it holds a focusing distance of 0.19 to 0.59 inches (0.5 to 1.5 cm), close enough for watch parts, jewelry settings, and other small precision work, while the interchangeable headband and bracket keep the whole thing steady through long sessions.Swap between four lens strengths — 10X, 15X, 20X, and 25X — without ever taking the headband off, and switch between the two lens barrels whenever your eyes need a break; alternating sides cuts visual fatigue on long jobs. For anyone who has looked at led magnifying glasses and wondered whether a headband beats a handheld version, the answer is in the six included LR1130 batteries: you get continuous illumination without ever setting the lens down to change one. Why choose Tuzwa Headband Loupe Magnifier Feature Tuzwa Others Worn on a headband, hands free ✓ Held by hand Four swappable lens strengths ✓ 1 fixed lens LED light built into both patches ✓ ✕ Two lens barrels cut eye fatigue ✓ ✕ Interchangeable bracket and headband fit ✓ Fixed strap 30-day easy returns ✓ Varies Key Features Built to Last: Premium ABS and glass materials make these magnifying glasses durable enough to endure regular daily use in any circumstance, so you're not sacrificing quality for a reliable companion in the workshop. Easy Battery Swaps: The user-friendly design makes changing the batteries simple and hassle-free, and effective battery management means continuous illumination whenever you need it. LED Double Eye Patches: LED lighting built into the left and right eye patches gives maximum visibility and removes shadows, brightening your whole work area so no detail gets missed. Four Swappable Magnifications: Quickly switch between 10X, 15X, 20X, and 25X lenses to meet the unique requirements of each job, so you always have the ideal magnification on hand. Adjustable Headband Fit: Because the bracket and headband swap into different interchangeable positions, you get a snug, secure fit that holds steady through long wear sessions. Built for Precision Work: Reach for these when installing or fixing cameras and other delicate equipment — they boost your productivity and accuracy as the ideal tool for intricate work. Two Lens Barrels Reduce Fatigue: Switching between the two lens barrels during extended use reduces visual fatigue and keeps your work efficiency up, so it's a productivity solution, not just a tool. Specifications Composition: ABS + Glass Focusing distance (close): 0.19–0.59 in (0.5–1.5 cm) Magnifications: 10X, 15X, 20X, and 25X Batteries: 6 x LR1130 (included) Package Includes: 1x Watch repair magnifier (headband) 2x 10X Lens 2x 15X Lens 2x 20X Lens 2x 25X Lens 1x Strip 1x User Guide Right for you if ✓You need both hands for the work itself — the headband holds the lens so you never have to grip one ✓You repair watches or small jewelry — 10X to 25X lenses focus down to 0.19 inches ✓Your workspace runs dim — LED lighting on both eye patches lights the piece directly ✓You work long sessions — two lens barrels let you alternate sides to ease visual fatigue If two or more of these sound like you, this is the one. FAQsQ: Do I have to hold this up to my eye?A: No — it's a headband magnifier, so it stays on your head and both hands stay free for the work in front of you.Q: How many magnification strengths does it come with?A: Four — 10X, 15X, 20X, and 25X lenses that swap in and out of the same headband.Q: What is it made of?A: The frame is ABS and glass, built to hold up to regular daily use.Q: How close can I focus?A: The lenses focus down to 0.19–0.59 inches (0.5–1.5 cm), close enough for watch parts and small jewelry work.Q: What batteries does it use, and are they included?A: Six LR1130 batteries power the two LED eye patches, and they're included in the box.
$81.77 $62.90
-
Magnetic Pickup Tool Telescoping, Magnetic Pick Up Tool with Pocket Clip, Extendable Telescoping Magnet Grabber Tool
Magnetic Pickup Tool Telescoping, Magnetic Pick Up Tool, Telescoping Magnet Grabber Tool Reaches where your hand cannot: the telescoping handle extends out to pull a dropped screw or bolt from a tight gap Holds heavy metal parts securely: the magnetic head grips up to 8 lbs so nothing slips free on the way back out Clips to your pocket, ready to go: the built-in pocket clip keeps the tool within reach at the workbench or under the car A steady grip on the handle: the handle design resists slipping, even when you are reaching at an awkward angle An LED-equipped option for dark corners: some configurations add an LED light for visibility in dim or hard-to-see spaces A dropped screw under the workbench or a bolt that rolled behind the dryer is not worth taking the whole panel apart for. This telescoping magnetic pick-up tool extends the handle out toward whatever tight corner the part landed in, and the magnetic head at the end grabs a screw, nut, bolt, or nail without you ever getting a hand in there. A pocket clip keeps the tool on you at the workbench, under the hood, or wherever the next dropped part turns up.The magnetic head holds up to 8 lbs (3.6 kg), enough to lift a handful of small metal parts without them slipping off partway back out, and the handle design keeps a steady grip even at an awkward reach. Some configurations add an LED light for visibility in dark or concealed spaces, running on replaceable batteries so the light keeps working long after the first set runs down. At roughly 0.4 lbs (0.2 kg), the whole tool is light enough to carry clipped to a pocket all day without it becoming one more thing to notice. Why choose Tuzwa Magnetic Pick-Up Tool Feature Tuzwa Others Telescoping handle adjusts its reach ✓ Fixed length Magnetic head holds up to 8 lbs ✓ Varies Pocket clip for on-the-go carrying ✓ ✕ Handle design resists slipping in hand ✓ Varies LED-equipped configuration available ✓ ✕ 30-day easy returns ✓ Varies Key FeaturesWhether the job is under a car, behind an appliance, or at the workbench, the same telescoping reach and magnetic head do the retrieving. Extendable Telescopic Handle: the handle extends out to adjust its length for whatever gap the part is stuck in Available With or Without LED: some configurations add an LED light, while others ship without one Secure Handle Grip: the handle design is built to resist slipping while you are reaching in at an angle Pocket Clip Included: a built-in clip keeps the tool carried on you, ready for the next dropped part Replaceable Batteries: the LED-equipped configuration runs on batteries that can be swapped out once they run down Specifications Extension Range (LED configuration): 7.5 to 33 inches (19.1 to 83.8 cm) Extension Range (black configuration): 5.5 to 24.4 inches (14 to 62 cm) Magnetic Load Capacity: 8 lbs (3.6 kg) Weight: Approximately 0.4 lbs (0.2 kg) Package Includes:1 x Magnetic Telescopic Pick-Up ToolApplicationsA secure magnetic grip retrieves items with minimal effort, whether it's collecting screws, nuts, bolts, nails, or other small metallic objects around automobiles, household appliances, workbenches, and cabinets. Right for you if ✓You keep dropping small parts in tight spots — the telescoping handle reaches where a hand cannot ✓You need to lift more than one part at once — the magnetic head holds up to 8 lbs securely ✓You want it on you at the workbench — the pocket clip keeps it within reach all day ✓You work in dim spaces like under a car — the LED-equipped configuration lights the corner up If two or more of these sound like you, this is the one. FAQsQ: How much weight can the magnetic head lift?A: Up to 8 lbs (3.6 kg) of metal parts, without them slipping off on the way back out.Q: Does the LED-equipped version reach as far as the standard one?A: The two configurations differ — the LED version extends 7.5 to 33 inches (19.1 to 83.8 cm), and the black version extends 5.5 to 24.4 inches (14 to 62 cm).Q: Can the LED light's batteries be replaced?A: Yes, the LED-equipped configuration runs on replaceable batteries.Q: Is there a way to carry it without a toolbox?A: Yes, a built-in pocket clip keeps the tool on you, ready for the next dropped part.Q: What is included in the box?A: One magnetic telescopic pick-up tool, weighing approximately 0.4 lbs (0.2 kg).
$90.87 $69.90
-
Sewing Guide Magnetic Seam Guide, Magnetic Seam Guide for Sewing Machine, Stainless Steel Sewing Machine Parts
Sewing Guide Magnetic Seam Guide for Sewing Machine, Stainless Steel Sewing Machine Parts Every seam the same width: set the magnet on the throat plate once and every seam that follows lines up exactly the same Stays put while you sew: the magnet holds its position securely against the plate, even when you are moving fast Move it in seconds: lift it off and reposition the guide wherever your next seam needs it Handles thick fabric without drifting: it holds its line steady even when sewing through thicker material Works with your machine: premium stainless steel and magnets fit sewing machine parts across all major, well-known brands Every quilter knows the moment: your seam wanders half a millimeter off the line, and now the whole block does not square up. This magnetic seam guide sits on the needle plate and gives the fabric a straight edge to follow, so a beginner's seam looks as clean as a pro's. It holds that line steady even when the fabric underneath gets thick, not just on a single layer of quilting cotton.Set the small magnet against the sewing machine's throat plate and let the fabric slide along its edge as you sew — the magnetic pull keeps it from drifting, seam after seam. Made from stainless steel, it doubles as a general sewing machine accessory: an anti-curling weight, a positioning guide, or simple edge protection, depending on what the project needs. When you are done, lift it straight off and store it with the rest of your embroidery tool kit until the next project. Why choose Tuzwa Magnetic Seam Guide Feature Tuzwa Others Magnet holds a consistent seam width ✓ ✕ Stainless steel resists rust and wear ✓ Varies Lifts off to reposition in seconds ✓ Fixed guide Works on curved and straight stitch lines ✓ Straight only Safe around computerized sewing machines ✓ ✕ 30-day easy returns ✓ Varies Key FeaturesEvery seam-related job gets the same steady width, whether it is a straight line, a curve, or a quick edge-protection trick. Accurate Seam Control: the magnet sits on the throat plate so every seam comes out the same width, every time Secure Positioning: the magnet stays securely in place while you sew, for stable, precise stitching Simple Repositioning: lift the guide off and set it down again wherever the next seam needs it Holds Through Thick Fabric: the guide stays on line even when the fabric underneath gets thick Specifications Composition: Stainless Steel Utilization: Embroidery Type: Parts for Sewing Machines Package Includes:1 x Magnetic Seam GuideHow to Use Place the magnet on your machine's needle or throat plate. Guide the fabric along the edge as you sew to keep the seam width consistent. Remove and reposition the magnetic guide whenever the next seam needs it. ApplicationsBeyond seams, the same stainless steel and magnets handle anti-curling, positioning, and edge-protection jobs around the sewing table.Home sewists and professional clothing makers reach for it just as often.Straight or curved stitch lines both come out with fewer errors.CompatibilityIt works across all the well-known quilting and sewing machine brands, not just one.Because the magnetic field has no effect on a sewing machine's electronics, it stays safe to use around computerized machines too. Right for you if ✓You quilt or sew multiple layers — the guide holds its line even through thicker fabric ✓Your machine is computerized — the magnetic field is safe around its electronics ✓You switch seam widths often — lift the guide and reposition it in seconds ✓You sew both straight seams and curves — it keeps both kinds of stitch lines even If two or more of these sound like you, this is the one. FAQsQ: Does it work on thick or multiple layers of fabric?A: Yes, it holds its line steady even when the fabric underneath is thicker than a single layer.Q: Will the magnet interfere with a computerized sewing machine?A: No, the magnetic field is safe around computerized machines and does not affect their electronics.Q: Can I move it to a new seam width partway through a project?A: Yes, lift it off and reposition it anywhere the throat plate allows.Q: Is it only for straight seams?A: No, it also helps keep curved stitch lines even, not just straight ones.Q: What is it made from?A: Premium stainless steel and magnets, built to hold up through daily sewing room use.
$81.09 $62.38
-
LED Work Light Rechargeable, Magnetic Work Light with 360 Degree Hook, Portable Work Light for Indoor and Outdoor
Magnetic LED Work Light, a Rechargeable Cordless Light with a 360 Degree Hook No outlet? This light doesn't care: a rechargeable lithium battery runs over 5 hours per charge, so it works as a cordless work light anywhere you need it Sticks right where the job is: the magnetic base grips toolboxes, car frames, or steel beams, so your hands stay free for the actual work Hang it, don't hold it: a foldable 360 degree hook lets you hang the light in tight spots or from an elevated surface Bright, even light across the whole job: the SMD or COB LED panel spreads wide, even illumination instead of the narrow beam of a basic cob led light Charges from whatever's around: USB-C works with a wall adapter, a power bank, or a car charger, so this rechargeable work light is always ready to go Working under a hood or behind a panel with no plug nearby usually means holding a light in one hand and your tools in the other. This led magnet light solves that: a magnetic base clips it to metal surfaces, so it stays exactly where you point it while both hands stay free. It's compact enough for a drawer or gear bag, but the rugged housing is built to survive daily trips to the job site.A high-output SMD or COB panel throws wide, even light across the workspace instead of a single narrow beam, which makes it easier to see the whole job — mechanics, construction crews, and DIY projects all benefit from consistent, bright coverage indoors or outdoors. One full charge of the built-in lithium battery runs over 5 hours, and a quick top-up through USB-C keeps it ready between jobs, whether you're plugging into a wall adapter, a power bank, or a car charger. Why choose Tuzwa Magnetic USB Work Light Feature Tuzwa Others Magnetic base frees both hands for the job ✓ Hand-held only 360° hook hangs in tight or high spots ✓ No hook SMD/COB panel spreads wide, even light ✓ Narrow beam Runs over 5 hours on one USB-C charge ✓ Shorter life Charges from wall, power bank, or car ✓ Wall plug only 30-day easy returns ✓ Varies Key Features Magnetic base: clips onto toolboxes, car frames, or steel beams for fully hands-free positioning. 360-degree rotating hook: folds flat for storage, then swings out to hang the light in a tight or elevated spot. SMD or COB LED panel: spreads wide, even light for mechanics, construction crews, and DIY work. USB-C rechargeable battery: one full charge runs over 5 hours, and it tops up from a wall adapter, power bank, or car charger. Compact, rugged housing: small enough for a drawer or gear bag, built to hold up on job sites. Specifications Light type: SMD or COB LED Battery type: Rechargeable lithium Battery life: Over 5 hours per charge Charging method: USB Type-C Mounting: Magnetic base and 360° rotating hook Application: Indoor/outdoor use, professional or personal tasks Dimensions: Approx. 7.8 × 1.7 × 1.4 in (19.8 × 4.3 × 3.6 cm) Weight: Approx. 0.44 lb (0.2 kg) Color options: Green, Yellow Package Includes:Powerful USB Magnetic LED Work LightChargingA full charge of the built-in lithium battery keeps this work light running for over 5 hours of continuous use, and the included USB-C port makes recharging quick. It's compatible with a wall adapter, a power bank, or a car charger, so staying charged and ready to go is never a hassle.MountingA strong integrated magnet lets the light attach securely to metal surfaces like toolboxes, car frames, or steel beams, so you can position it exactly where you need light without tying up your hands — safer and more efficient when you're working in low-light conditions.DesignThe rugged housing gives it durability for storage among drawers or gear bags between job sites. This foldable 360° hook swings out to hang the light from elevated surfaces or into tight spaces, and its compact size keeps it out of the way. Right for you if ✓You work with no outlet nearby — a full charge runs the light for over 5 hours ✓You need both hands free on the job — the magnetic base holds it on metal surfaces ✓You're working in a tight or elevated spot — the foldable 360° hook hangs it out of your way ✓You need even light across the whole job — the SMD or COB panel spreads wide instead of one hot spot If two or more of these sound like you, this is the one. FAQsQ: How long does the battery last per charge?A: The built-in lithium battery provides over 5 hours of continuous use on a full charge.Q: Can I charge it with a regular phone charger?A: Yes — the USB-C port works with standard phone chargers, power banks, or USB wall plugs.Q: Is it suitable for car repairs?A: Yes, the magnetic base attaches securely to metal surfaces, which makes it useful for under-the-hood or undercarriage work.Q: Does it stay in place once I've positioned it?A: Yes — the magnetic base and the foldable 360° hook both hold it there without you needing to hold it yourself.Q: Is it durable enough for daily job site use?A: Yes — the rugged housing is built to hold up to daily use.
$90.87 $69.90
-
Wire Puller Magnetic Cable Guide, Electrical Wire Puller for Walls and Ceilings, Wire Pulling Tool with Retrieval Loop
Wire Puller Magnetic Cable Guide, Electrical Wire Puller for Walls and Ceilings No line of sight needed: this wire puller uses a magnetic leader and follower unit to route cable through walls and ceilings blind. Works around what's in the way: the magnetic pair navigates cable around studs, joists, and other obstructions inside the wall. Grabs and pulls in one motion: the included retrieval loop accessory hooks the cable so you can pull it straight through. Small enough for tight spots: the compact housing fits into confined spaces where a bulkier wire pulling tool won't. Built for the job site and the home: it's sized for electrical, data, or AV cable routing in residential or light commercial settings. Fishing a cable through a finished wall usually means cutting drywall just to see where the run is going. This wire puller skips that step: a magnetic leader unit on one side of the wall and a follower unit on the other stay aligned through the drywall, so you can track and guide the cable's path without opening anything up.As an electrical wire puller built for both finished and unfinished interiors, the magnetic cable guide handles routing around studs, joists, and conduit paths for common electrical and data cables, and the retrieval loop accessory makes the final pull straightforward once the cable reaches the opening. Why choose Tuzwa Magnetic Wire Puller Feature Tuzwa Others Magnetic leader and follower track through drywall ✓ ✕ Navigates cable around studs and joists blind ✓ Sighted only Retrieval loop hooks the cable for the final pull ✓ Not included Compact housing fits confined spaces ✓ Bulkier Works in finished or unfinished interiors ✓ Varies 30-day easy returns ✓ Varies Key Features Magnetic Leader and Follower: The paired magnetic units track each other across the wall, guiding enclosed cable routing without a direct line of sight. Obstruction Navigation: The magnetic pair supports routing cable indirectly around studs, joists, and similar obstructions inside the wall. Compact Footprint: A small housing size lets the tool work its way into confined spaces other wire pulling tools can't reach. Wall, Ceiling, and Conduit Use: It's built for cable routing through walls, ceilings, and conduit runs alike. Finished or Unfinished Interiors: The magnetic guide system is designed to work in both finished and unfinished interior spaces. Specifications Dimensions: Approx. 2.5 in (6.3 cm) diameter (leader unit), 1.8 in x 0.6 in (4.6 x 1.5 cm) (follower unit) Material: Plastic housing with internal magnets Use: Cable routing through non-metallic wall and ceiling structures Compatibility: Supports common electrical and data cables Application: Suitable for indoor installation environments Package Includes: 1 x Magnetic Leader Unit 1 x Magnetic Follower Unit 1 x Retrieval Loop Accessory Right for you if ✓You don't want to cut drywall to find a cable run — the magnetic leader and follower track it from outside ✓Your cable run has studs or joists in the way — the magnetic pair navigates around them ✓You need the final pull to go smoothly — the retrieval loop hooks the cable once it reaches the opening ✓You're working in a tight space — the compact housing fits where bulkier tools won't If two or more of these sound like you, this is the one. FAQsQ: How does the magnetic pair work without opening the wall?A: The leader unit and follower unit stay aligned across the drywall through their magnets, so you can track the cable's path from either side.Q: Can it route cable around studs and joists?A: Yes — the magnetic system supports indirect navigation around studs, joists, and similar obstructions.Q: What's the retrieval loop for?A: It hooks the cable once the follower unit reaches the opening, so you can pull it straight through.Q: Is this suitable for a finished interior?A: Yes — it's designed to work in both finished and unfinished interior spaces.Q: What cable types does it support?A: Common electrical and data cables used in wall, ceiling, and conduit routing for residential or light commercial installs.
$88.66 $68.20
-
Portable Air Pump, Mini Electric Air Pump with LED Light, Rechargeable Air Mattress Pump for Pool Toys and Vacuum Bags
Portable Air Pump, Mini Electric Air Pump with LED Light, Rechargeable Air Mattress Pump Inflate a pool float in minutes, not on lung power: the motor pushes 180L of air a minute Switches jobs with one toggle: flip between inflate and deflate for beach toys or vacuum storage bags Lights the way after dark: the built-in LED doubles as a lantern with three brightness settings Never overfills your gear: smart pressure control stops automatically at the right firmness Ready for whatever you're inflating: five nozzle attachments fit pool toys, air beds, and more Pack this inflation pump for the beach, the campsite, or moving day and it earns its keep the moment you need to fill something fast — the motor blasts air at 180L a minute, so a float or an air mattress firms up in a couple of minutes instead of a couple of deep breaths. As a battery air pump, a full Type-C charge carries you through 10 or more air cushions or 20 or more vacuum bags before it needs to sit on the charger again.This inflatable pump's dual-function motor switches between inflation and vacuum modes with one toggle, building 3.5kPa of pressure to inflate or 3kPa to draw air back out, while smart pressure control keeps it from over-inflating. As a cordless air pump and portable inflator in one, it works as an air bed pump at home and a vacuum storage bag pump when it's time to pack the closet away, and the 40 to 400 lumen LED beacon means it doubles as a light source on the way there. Why choose Tuzwa Rechargeable Mini Air Pump Feature Tuzwa Others 180L/min motor inflates in minutes ✓ Slower fill Switches between inflate and vacuum modes ✓ Inflate only Built-in LED beacon, up to 400lm ✓ No light Smart pressure control stops overfilling ✓ No auto-stop Five nozzles fit pool toys to air beds ✓ One nozzle 30-day easy returns ✓ Varies Key Features Ultra-Fast Inflation Power: the motor moves air at 180L a minute and 3.5kPa of pressure, filling beach toys and air beds in moments Triple-Mode LED Beacon: brightness runs from 40lm up to 400lm at 4500K, with up to 10 hours of runtime on the low setting Micro-Mighty Design: at 3.1 oz (89g) and 1.7x1.7x2.1 in (43x43x53mm), it's light enough to carry in a pocket without losing inflation power Dual-Function Versatility: one toggle switches between inflation and vacuum modes for outdoor gear or home storage Endurance Powerhouse: the 1300mAh battery handles 10-plus air cushions or 20-plus vacuum bags on a single Type-C charge Universal Compatibility: five nozzle attachments adapt it to pool toys and heavy-duty air mattresses alike Premium Build Quality: rugged ABS construction holds up outdoors while staying lightweight Smart Pressure Control: automatic monitoring keeps every inflatable at the right firmness without overfilling Specifications Material: ABS Dimensions: 1.7 x 1.7 x 2.1 in (43 x 43 x 53 mm) Power Rating: 13.5W Inflation Speed: 180L per minute Max Pressure: 3.5kPa Suction Pressure: 3kPa Battery Capacity: 1300mAh Weight: 3.1 oz (89g) Light Output: 40-400lm Color Temperature: 4500K Operating Modes: inflate / deflate / light Charging Port: Type-C Compression Rate: 50% Accessories: 5 nozzle attachments Light Runtime: 10 hours at 40lm, 2.5 hours at 160lm, 1 hour at 400lm Package Includes: 1 x Air Pump 5 x Nozzle Attachments Right for you if ✓You're packing for the beach or a camping trip — 3.1 oz and 1.7 x 1.7 x 2.1 in slips right in a bag ✓You need to pack away vacuum storage bags fast — the vacuum mode pulls air out just as easily as it inflates ✓You've run out of hands in the dark — the built-in LED runs up to 400lm as a beacon ✓You don't want to guess when it's full enough — smart pressure control stops it automatically If two or more of these sound like you, this is the one. FAQsQ: How fast does it inflate?A: Air moves at 180L a minute with 3.5kPa of pressure, so beach toys and air beds fill in moments.Q: Can it deflate as well as inflate?A: Yes, one toggle switches the motor between inflation and vacuum mode.Q: How long does the battery last?A: A full charge handles 10-plus air cushions or 20-plus vacuum bags before it needs charging again.Q: Does it come with different nozzles?A: Yes, five nozzle attachments are included for pool toys, air beds, and more.Q: Does the light have more than one brightness?A: Yes, the LED runs from 40lm up to 400lm across three settings.
$90.90 $69.92
-
Metal Epoxy Glue for Steel and Aluminum, Two Part Epoxy Putty, Heat Resistant Metal Repair Glue for Cast Iron
Metal Epoxy Glue for Steel and Aluminum, Two Part Epoxy Putty, Metal Repair Glue Fixes the crack before it gets worse: mix, apply and press it into the crack today Strength that holds up: reaches up to 95 megapascals, holding firm under heavy everyday loads Ready to drill, sand or paint: the cured repair works just like solid metal No torch, no sparks, no mess: just mix, apply and let it set Built for steel, aluminum and cast iron: one tube handles nearly any metal repair That crack in your metal workbench keeps getting bigger, and a shop repair feels like a hassle. This metal epoxy glue fixes broken tool handles, split radiator tanks or busted trailer hardware right in your garage.Squeeze equal amounts from each tube, mix until blended, then press it into the crack or hole. It firms up in an hour, turns rock hard in 24, and bonds to steel, aluminum, cast iron and most other metals. Why choose Tuzwa Metal Epoxy Repair Glue Feature Tuzwa Others Cured strength up to 95 MPa ✓ Weaker bond Works from -40°F to 392°F ✓ Narrower range Drillable, tappable and paintable ✓ ✕ No torch or welding gear needed ✓ ✕ Sets in 1 hour, cures in 24 ✓ Slower cure 30-day easy returns ✓ Varies Key FeaturesHere is what the cured repair can take: Weld-Beating Strength: Cured bonds reach up to 95 megapascals, tougher than the metal itself. Handles Extreme Temperatures: From 40 degrees below zero up to 392°F (200°C), this bond keeps protecting your repair whether winter turns harsh or summer turns blazing. Fully Workable Once Cured: Drill it, tap it, sand it, polish it or paint it once cured. Simple 1:1 Mixing: Squeeze equal amounts from each tube and blend, no guesswork needed. Bonds to Any Metal: It bonds permanently to steel, aluminum, cast iron and most metals. Seals Out Water and Rust: Once cured it resists water, oil, mildew, corrosion and heavy impacts, keeping repairs sealed tight for years of use. Sets in an Hour: It firms up enough to handle in 60 minutes and reaches full bonding strength after 24 hours of curing. No Torch or Welding Gear: No special tools, torches or welding equipment needed — anyone can do a professional quality repair at home. Specifications Initial Set Time: 60 minutes Full Cure Time: 24 hours Compressive Strength: 82 to 95 MPa Density: 99.8 to 115.4 lb/ft3 Temperature Range: -40 to 392 degrees F Mixing Ratio: 1:1 Compatible Metals: Steel, aluminum, cast iron Resistance: Water, oil, mildew, corrosion Post Cure Work: Drilling, tapping, sanding, painting Package Includes:1 x Metal Repair Glue (two-part epoxy tubes)How to Use Squeeze out the same amount from each tube, keeping the 1:1 ratio. Mix the two together until you get one smooth blend. Smear the blended mix over the broken area, working it into any crack or hole until it's filled. Give it about an hour to firm up, then leave it a full day to reach maximum strength. Right for you if ✓A metal part cracked and a shop repair feels like overkill — mix and apply it right in your garage ✓You need a bond that holds under load — cured strength reaches up to 95 megapascals ✓Your repair sits outdoors through hot summers and freezing winters — it holds from -40°F to 392°F ✓You want to drill, sand or paint the fix — the cured surface works just like solid metal If two or more of these sound like you, this is the one. FAQsQ: How strong is the bond once it cures?A: It reaches up to 95 megapascals of compressive strength, tougher than the original metal in many repairs.Q: What metals does it work on?A: Steel, aluminum, cast iron and practically any metal surface you need to repair.Q: Do I need any safety gear to use it?A: Yes — work in a ventilated area, wear gloves while mixing and applying, and keep it away from children.Q: Can I paint over it once it's cured?A: Yes — you can drill, tap threads, sand, polish or paint directly over the cured repair.Q: How long before it's fully set?A: It firms up in about an hour and reaches full strength after 24 hours of curing.
$81.77 $62.90
-
Metal Cutting Adapter for Drill, Sheet Metal Cutter Drill Attachment, Drill Metal Cutting Attachment for Workshop
Metal Cutting Adapter for Drill, Sheet Metal Cutter Drill Attachment for Workshop A drill metal cutting attachment for one more job: connect the adapter and your regular drill becomes a metal cutter No extra tools to buy or store: it eliminates the need for several specialized metal cutting tools Clean cuts without the learning curve: smooth operation gives clean cuts through a variety of metals Built for the job site and the garage: lightweight and portable, it's simple to carry and handle From first-timer to pro: the simple method suits novice and expert users alike A metal panel that needs cutting and no metal cutter in the shop — that used to mean a trip to buy a specialized tool for a job you might do once. This metal cutting adapter for drill changes that: connect it to the drill you already own and start cutting, no separate machine, no extra purchase, no complicated setup required.Built from premium materials for long-term durability and safe operation, the adapter turns any regular drill into a drill metal cutting attachment capable of smooth, clean cuts through a variety of metals. Its compact, space-saving size takes up minimal room in a toolbox, which makes it a natural fit for mobile workers or anyone who would rather carry one drill attachment than a case full of specialized cutters — and because it simply connects to your current drill, using it as a metal cutting attachment takes no special skill to learn. Why choose Tuzwa Drill Metal Cutting Adapter Feature Tuzwa Others Turns your drill into a metal cutter ✓ ✕ No separate cutting machine to buy ✓ Needs a cutter Compact size fits in a toolbox ✓ Bulkier tools Simple connect-and-cut setup ✓ More steps Works for beginners and experts alike ✓ Steeper 30-day easy returns ✓ Varies Key FeaturesHere is what the adapter is built to do: Durable and Safe Construction: The build relies on premium materials so it holds up over time and operates safely. Lightweight and Portable: It handles and carries easily, suited to on-site jobs and home workshops alike. Easy to Use: There is nothing complicated or heavy to set up — attach it to the drill you already own and start cutting. Versatile Cutting Tool: It cuts through a range of metals with smooth operation and clean results. Cost-Effective: It removes the need for several specialized tools, cutting down your overall toolset spending. Space-Saving: A small footprint means it barely takes up any toolbox space, which suits mobile workers and minimalist kits alike. User-Friendly: The straightforward method works for first-time users and improves results for experienced ones too. Specifications Type: Metal cutting adapter attachment for power drillsPackage Includes:1 x metal cutting adapter (drill plate cutter)How to Use Attach the adapter onto your current drill. Start cutting — no other equipment is required. Right for you if ✓You need to cut sheet metal but do not own a metal cutter — the adapter turns your drill into one ✓You want to avoid buying specialized tools — it removes the need for several separate cutting tools ✓You work on-site or in a home workshop — the lightweight, portable build is simple to carry ✓You are new to metal cutting — the simple connect-and-cut method suits novice and expert users alike If two or more of these sound like you, this is the one. FAQsQ: Does it fit my regular drill?A: Yes — it connects onto a standard power drill and turns it into a working metal cutter.Q: What metals can it cut through?A: It's built to cut through a variety of metals with smooth, consistently clean operation.Q: Is it hard to set up the first time?A: No — no complicated or heavy equipment is needed, just connect it to your drill and begin cutting.Q: Is it easy to store in a small toolbox?A: Yes — its compact, space-saving size takes up minimal room, even in a crowded toolbox.Q: Is it suitable for a first-time user?A: Yes — the simple connect-and-cut method works for novice and expert users alike.
$103.87 $79.90
-
Air Blower Cordless Mini, Turbo Fan Air Duster for Car Detailing and Keyboard, Handheld Air Blower for Electronics
Cordless Mini Air Blower, Turbo Fan Air Duster for Car Detailing and Electronics Clears dust in seconds: the handheld air blower's 110,000 RPM turbo fan blasts dust out of keyboards and electronics Detail your car without a shop visit: the air duster's narrow airflow reaches vents and crevices a rag can't Never wait around for a compressor: two rechargeable 18650 batteries make this air blower fully cordless Skip the noisy motor buzz: the brushless motor keeps things quiet while it works Back to blowing in minutes: QC15W Type-C fast charging tops the batteries up quickly Dust bunnies in the keyboard, grime along the car dash vents, sawdust on the workbench — when one blower can clear all three, why reach for three different tools? This cordless air blower runs on two rechargeable batteries, so there is no cord to string across the garage and no compressor to warm up first — point it at the mess and the airflow does the rest.A brushless motor spins 13 fan blades up to 110,000 RPM, so this mini blower works as an electric air duster for laptop keyboards, an electronics cleaner for fans and vents, a car detailing tool and car cleaning tool for tight interior crevices, and a plain dust blower for shelves and workbenches. Twin ball bearings keep the motor smooth for the long run, and as an electric duster it never needs a wall outlet — just recharge the two 18650 cells fast over Type-C. Why choose Tuzwa Cordless Mini Air Blower Feature Tuzwa Others Clears dust fast with 110,000 RPM airflow ✓ ✕ Two rechargeable batteries, zero cords ✓ Corded only 13 blades built in for extra push ✓ Fewer blades Recharges fast over Type-C ✓ Slower charge Dual-ball bearings for a longer lifespan ✓ ✕ 30-day easy returns ✓ Varies Key Features Brushless motor: spins quietly to deliver fast, hassle-free airflow without the racket of a standard motor.Specifications Maximum Power: 180W Charging: QC15W fast charging via Type-C connector Maximum Speed: 110,000 RPM Fan Blades: 13 Bearing Type: Dual-ball bearing Battery Cells: Two 18650 cells Battery Capacity: 3000mAh per cell Max Discharge Current: 30A Casing Material: Light-cured 3D printing material, polished Color Options: Black, Gray Package Includes:1 x Mini Turbo Jet FanApplicationsThis blower covers a wide range of jobs thanks to its 13 fan blades and efficiency-minded design — quick dusting, a fast hair style touch-up, drying off damp surfaces, and easier car maintenance. The result is better airflow and real adaptability in any room, any time. Right for you if ✓You want no compressor and no cord — two rechargeable 18650 batteries keep it cordless ✓You need to clear dust from a keyboard or vents — 13 fan blades spin up to 110,000 RPM ✓You keep running out of charge mid-job — QC15W fast charging tops it up over Type-C ✓You want gear built to last — twin ball bearings back the brushless motor If two or more of these sound like you, this is the one. FAQsQ: How much airflow does this air blower produce?A: A brushless motor spinning 13 fan blades reaches speeds up to 110,000 RPM, giving it strong, focused airflow for dusting, drying, and car detailing.Q: Is it cordless?A: Yes, it runs on two rechargeable 18650 batteries, each rated for 3000mAh with a 30A max discharge current, so there is no cord or compressor to deal with.Q: How do I recharge it?A: Connect it over the Type-C port, which supports QC15W fast charging so it is back in your hand quickly.Q: What comes in the box?A: One mini turbo jet fan blower, ready to use once its two 18650 batteries are charged.Q: What is the housing made of?A: A polished, light-cured 3D-printed casing paired with dual-ball bearings inside, built for long-term everyday durability.
$103.87 $79.90
You have seen 192 out of 334 products