Description
Cordless Hammer Drill Brushless with Four Modes for Concrete, Steel and Wood
-
Cuts through concrete without a fight: four modes turn this into a concrete hammer drill exactly when you need one, then back to plain drilling.
-
Finishes wood jobs clean: it's a capable drill for wood up to 1 inch thick, plus steel to half an inch and concrete to 1.2 inches.
-
Power on tap, no cord to fight: squeeze the trigger and this power drill ramps up to 900 RPM.
-
Four jobs, one knob: this rotary hammer switches between drilling, hammer drilling, chiseling and bit-position adjustment in one twist.
-
Works in tight, awkward spots: the handle spins 360 degrees so you can angle it into corners and overhead spaces without twisting your wrist.
Concrete has a way of turning a quick job into an afternoon fight, especially with a cordless drill that stalls out halfway through the wall. This one is built to keep going, so you are hanging shelves, setting anchors, and finishing framing on schedule instead of nursing an underpowered cordless power tool through every hole.
Twist the mode knob and this rotary hammer drill goes from a straightforward battery drill to a concrete drill in a second — as a brushless drill, it holds steady torque instead of bogging down. The chuck locks bits tight through heavy chiseling, the depth gauge snaps on to mark exactly how deep to go, and forward/reverse pops a stuck bit free without reaching for a separate drill kit. On masonry it doubles as a light concrete breaker, chiseling concrete without switching tools.
Why choose Tuzwa
Cordless Hammer Drill
| Feature |
Tuzwa |
Others |
| Four modes: drill, hammer, chisel, bit-set |
✓ |
Fewer modes |
| 0-900 RPM with a brushless motor |
✓ |
Brushed motor |
| Drills wood, steel and concrete |
✓ |
Wood only |
| 360-degree rotating handle for tight spots |
✓ |
Fixed handle |
| Forward/reverse ejects stuck bits fast |
✓ |
Manual only |
| 30-day easy returns |
✓ |
Varies |
Key Features
What this hammer drill brings to the job:
-
Brushless Motor: runs cooler with no carbon brush wear, holding consistent torque through concrete, steel and wood.
-
Variable Speed: the trigger dials speed from zero up to 900 RPM for control across materials and depths.
-
Four Modes: one knob switches between drilling, hammer drilling, chiseling and bit-position adjustment.
-
Rotating Handle: the textured grip handle spins a full 360 degrees for comfortable control in tight or overhead spots.
-
Chuck Lock: grips bits firmly without slipping through heavy concrete drilling or continuous chisel work.
-
Depth Gauge: the detachable gauge snaps on to mark exact drilling depth for repeatable holes.
-
Forward/Reverse Switch: flip it to pop a stuck or jammed bit out instantly, no extra tools needed.
-
Material Capacity: drills clean holes through wood up to 1 inch (2.5 cm), steel to half an inch, and concrete to 1.2 inches (3 cm) deep.
Specifications
-
Motor Type: Brushless
-
Speed Range: 0 to 900 RPM
-
Operating Modes: Four Functions
-
Handle Rotation: 360 Degrees
-
Wood Capacity: 1 inch (2.5 cm)
-
Steel Capacity: 0.5 inch (1.3 cm)
-
Concrete Capacity: 1.2 inches (3 cm)
-
Chuck Type: High Strength
-
Depth Control: Adjustable Gauge
-
Direction Control: Forward and Reverse
-
Handle Design: Textured Grip
-
Power Source: Cordless Battery
Package Includes:
- 1 x Brushless Cordless Rotary Hammer Drill
Right for you if
-
✓You're drilling into a concrete wall — modes switch to hammer drilling and chiseling with one knob
-
✓You need to reach an overhead or angled spot — the handle rotates a full 360 degrees
-
✓You switch between materials on one job — drills wood to 1 in, steel to 0.5 in, concrete to 1.2 in
-
✓A bit jams mid-hole — flip the forward/reverse switch to pop it free instantly
If two or more of these sound like you, this is the one.
FAQs
Q: What can this hammer drill cut through?
A: It drills wood up to 1 inch (2.5 cm), steel up to half an inch, and concrete up to 1.2 inches (3 cm) deep, switching among drilling, hammer drilling, chiseling and bit-position modes with one knob.
Q: How fast does it run?
A: Speed is variable from 0 up to 900 RPM, controlled by how hard you squeeze the trigger.
Q: Does the handle move for tight spaces?
A: Yes, the textured grip handle rotates a full 360 degrees for awkward angles and overhead work.
Q: What happens if a bit gets stuck?
A: Flip the forward/reverse switch to pop a stuck or jammed bit out instantly.
Q: What safety precautions should I take?
A: Wear eye protection when drilling or chiseling, especially into concrete, and keep hands clear of the chuck while it is running.
