Description
Car Tablet Mount with Tri Axis Rotation, Car Headrest Tablet Mount for Back Seats
-
No more lap balancing: this tablet holder for car rides keeps the screen fixed between the front seats
-
Any angle, no neck strain: the 360 degree ball joint swings the screen toward one seat or between two
-
Right where you need it: the extendable tablet holder arm extends and rotates to the exact position
-
Ready in seconds: tool-free clamps go on in about three seconds and the tablet drops in within two
-
Steady on rough roads: a deep fixed screw hook adds stability and non-slip pads protect the device
Long drives with children go easier with a screen, until the tablet in a small lap ends up on the floor. Clamped to the front seat, this mount holds the tablet in view of the back seat and the arm can swing it to either rear seat, so two children can watch together. Check that the front seats have headrest posts first: the clamp grips the bars, and a seat without them, like some Volvo models, is not a match.
A headrest tablet holder like this one wraps around bars spaced 0.39 to 6.3 in (1 to 16 cm), then the tri axis arm extends from 2.4 to 10.6 in (60 to 270 mm) and the ball joint turns 360 degrees. Non-slip rubber pads protect the device from scratches while it holds tablets from 4.7 to 12.9 in (11.9 to 32.8 cm), including iPad Pro, Air, Galaxy Tab and Kindle, on SUVs, pickup trucks and sedans that have headrest posts.
Why choose Tuzwa
Car Headrest Tablet Mount
| Feature |
Tuzwa |
Others |
| Screen stays fixed between the front seats |
✓ |
✕ |
| Arm swings to either rear seat |
✓ |
Fixed angle |
| Goes on in about three seconds, no tools |
✓ |
Varies |
| Deep screw hook steadies it on rough roads |
✓ |
Varies |
| Fits tablets from 4.7 to 12.9 in |
✓ |
Varies |
| 30-day easy returns |
✓ |
Varies |
Why You'll Love It
Here is what the mount is built with:
-
Fixed Screen: the tablet stays put between the seats, so nobody balances it on a lap
-
Back Seat Ready: the holder stays steady when the road gets bumpy
-
Neck-Friendly Angle: the 360 degree ball joint turns the screen so necks are not strained
-
Quick Setup: tool-free clamps fit in three seconds and the tablet seats in two
-
Headrest Posts Required: it grips headrest bars, so seats without them are not a match
-
Tri-Axis Arm: extends and rotates until the screen sits in the exact position
-
Ball Joint Swing: points the tablet at one seat or shares it between two
-
Install Without Tools: no tools are needed and it takes about three seconds
-
Screw Hook Grip: a deep fixed hook adds stability on rough roads
-
Rubber Pads: non-slip pads keep scratches off the device
-
Vehicle Match: suits SUVs, pickup trucks and sedans that have headrest posts
-
Device Range: holds iPad Pro, Air, Galaxy Tab and Kindle tablets from 4.7 to 12.9 in (11.9 to 32.8 cm)
Specifications
-
Size folded: 10.8 x 5 x 2.2 in (275 x 126 x 55 mm)
-
Extension length: approx. 2.4-10.6 in (60-270 mm)
-
Material: ABS, aluminium alloy and silicone
-
Supported device sizes: 4.7-12.9 in (11.9-32.8 cm)
-
Weight: 11.6 oz (329 g)
-
Headrest bar spacing: 0.39-6.3 in (1-16 cm)
-
Rotation: 360 degrees
-
Installation: No tools required
-
Installation time: about three seconds
Package Includes:
- 1 x Car Headrest Tablet Holder
How to Use
- Set the bracket around the front seat headrest bars.
- Turn the screw hook until it feels firm.
- Extend the arm and rotate it into position.
- Drop the tablet into the cradle.
Right for you if
-
✓Your children watch on long drives — the arm swings the tablet between the two rear seats
-
✓Your front seats have headrest posts — the mount clamps onto bars spaced 0.39 to 6.3 in
-
✓You drive an SUV, pickup truck or sedan — it fits all three when headrest posts are there
-
✓You own an iPad Pro, Galaxy Tab or Kindle — it holds devices from 4.7 to 12.9 in
If two or more of these sound like you, this is the one.
FAQs
Q: Which tablets fit this car tablet mount?
A: Devices from 4.7 to 12.9 in (11.9 to 32.8 cm), including iPad Pro, Air, Galaxy Tab and Kindle.
Q: Will it fit my car's headrests?
A: It fits bar spacing of 0.39 to 6.3 in (1 to 16 cm) on SUVs, pickup trucks and sedans, but not seats without headrest bars, like some Volvo models.
Q: How long does installation take?
A: About three seconds for the mount and two more to seat the tablet, with no tools.
Q: Can two children watch at once?
A: Yes, the arm swings the tablet between the two rear seats.
Q: Is it stable on rough roads?
A: The deep fixed screw hook adds stability, and the non-slip rubber pads protect the device from scratches.
