Description
SATA to USB Adapter, IDE to USB Adapter, USB 3.0 Hard Drive Reader
-
Old drives, new life: a regular IDE or SATA disk becomes an external drive for backup and archive storage
-
No drivers to hunt down: plug and play with hot swap, so you just connect the disk and a free USB port
-
Old IDE gear works again: it handles legacy IDE hardware that newer motherboards dropped
-
Big disks get power too: the included 12V 2A power supply runs larger form-factor drives
-
Large backups keep moving: up to 5 Gbps over USB 3.0, backward compatible with USB 2.0 and 1.1
The photos you thought were gone are usually still sitting on a disk in a drawer. This bridge turns an old IDE or SATA disk into an external drive for backup and archive storage and reads it on any modern machine: insert the adapter into the hard drive and the USB port on the computer and it works. It supports Windows 10, 8.1, 8, 7, Vista and XP, plus macOS and Linux, and no drivers are needed.
Used as an HDD to USB adapter or an SSD to USB adapter, this hard drive reader handles 2.5 and 3.5 inch (8.9 cm) SATA and IDE HDD and SSD, plus 5.25 inch (13.3 cm) CD/DVD ROM, CD-RW, COMBO and DVD-RW drives, which covers all currently available IDE/ATAPI devices. Its compact, lightweight housing makes it a low cost USB hard drive adapter between modern and legacy motherboard interfaces, with an on/off switch for HDD protection and an LED that shows power and activity.
Why choose Tuzwa
SATA IDE USB Adapter
| Feature |
Tuzwa |
Others |
| Reads both IDE and SATA drives |
✓ |
Varies |
| Plug and play with hot swap, no drivers |
✓ |
Varies |
| Includes a 12V 2A power supply |
✓ |
Varies |
| On/off switch and LED power light |
✓ |
Varies |
| Backward compatible with USB 2.0 and 1.1 |
✓ |
Varies |
| 30-day easy returns |
✓ |
Varies |
Why You'll Love It
Drive support, power and speed are all built around reviving old storage:
-
Old drives, new life: A practical external drive for backup and archive storage is what any regular IDE or SATA disk becomes.
-
No drivers needed: With plug and play and hot swap support, you connect the disk and a free USB port and you are done.
-
5 Gbps over USB 3.0: It is backward compatible with USB 2.0 and 1.1 and uses 40% fewer processing resources.
-
Powers full size disks: Larger form-factor drives run from the included 12V 2A power supply, and an on/off switch and an LED are built in.
-
Fast performance: Backward compatible with USB 2.0 and 1.1, it reaches data transfer rates of up to 5 Gbps and uses 40% fewer processing resources.
-
Widely compatible: Mainstream desktop and laptop operating systems are covered, and plugging the adapter into the hard drive and the USB port is all it takes, with no drivers.
-
Compact and lightweight: The housing is compact and light, and it bridges modern and legacy motherboard interfaces at low cost.
-
Legacy IDE support: Legacy IDE hardware that newer motherboards dropped years ago still works through it.
-
Universal drive adapter: It supports 2.5/3.5 inch SATA/IDE HDD and SSD and 5.25 inch (13.3 cm) CD/DVD ROM, CD-RW, COMBO and DVD-RW drives.
-
Additional features: Plug and play, hot swap support and an on/off switch for HDD protection come with an LED that shows power and activity.
-
Included power supply: With the included 12V 2A power supply you can power larger form-factor SATA or IDE drives.
Specifications
-
Interface: USB 3.0, backward compatible with USB 2.0 and 1.1
-
Transfer Rate: Up to 5 Gbps
-
Efficiency: Uses 40% fewer processing resources
-
Supported Drives: 2.5/3.5 inch SATA/IDE HDD and SSD and 5.25 inch (13.3 cm) CD/DVD ROM CD-RW, COMBO and DVD-RW
-
Legacy Support: All currently available IDE/ATAPI devices, including CD-ROM, CD-RW and DVD-ROM drives
-
Power Supply: Included 12V 2A adapter
-
Operating Systems: Windows 10/8.1/ 8/ 7/Vista/XP, macOS and Linux
-
Drivers: None needed
-
Features: Plug and play, hot swap support, on/off switch for HDD protection, LED power and activity light
-
Design: Compact and lightweight
Package Includes:
- 1 x USB 3.0 to IDE/SATA Hard Drive Adapter
- 1 x 12V 2A Power Supply
How to Use
Insert the adapter into the hard drive and the USB port on the computer, and it works.
Right for you if
-
✓You have an old IDE or SATA disk in a drawer — turns it into an external drive for backup and archive
-
✓You want to skip driver installs — plug and play with hot swap support, no drivers needed
-
✓You own larger form-factor drives — the included 12V 2A power supply runs them
-
✓You use 2.5 or 3.5 inch HDD and SSD — supports SATA/IDE drives and 5.25 inch CD/DVD drives
If two or more of these sound like you, this is the one.
FAQs
Q: Will this USB 3.0 hard drive reader work with old IDE drives?
A: Yes, it supports all currently available IDE/ATAPI devices, including 2.5 and 3.5 inch (8.9 cm) IDE and SATA hard disks and CD-ROM drives.
Q: How fast is the SATA to USB adapter?
A: Data transfer rates reach up to 5 Gbps.
Q: Do I need to install drivers for this hard drive reader?
A: No, just insert the adapter into the hard drive and the USB port; it is plug and play.
Q: Does it work with CD and DVD drives too?
A: Yes, it supports 5.25 inch (13.3 cm) CD/DVD ROM, CD-RW, COMBO and DVD-RW drives.
Q: Does this hard drive to USB adapter come with a power supply?
A: Yes, the included 12V 2A power supply runs larger form-factor SATA or IDE drives.
